Specification sheet Wheel Loader Ref john-deere-344e-wheel-loader
John Deere 344E
The John Deere 344E is a wheel loader with an operating weight of 16,014 lb (7,263.83 kg), a 75 hp engine, and a 1.63 yd³ (1.25 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,014lb
7,263.83kg
Engine power
75hp
56kW
Net Power Bucket capacity
1.63yd³
1.25m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 344E sits above the median for its class:
- Operating weight 16,010 lb heavier than 68% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 68% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4045D | |
| Net Power | 75hp | 56kw |
| Gross Power | 80hp | 59.7kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 215lb ft | 291.6Nm |
| Displacement | 276cu in | 4.6L |
| Torque Measured @ | 1200rpm | |
| Aspiration | Natural |
02 Operational Specification
| Operating Weight | 16014lb | 7263.9kg |
|---|---|---|
| Fuel Capacity | 32gal | 121.2L |
| Hydraulic System Fluid Capacity | 10.6gal | 40L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 9gal | 34L |
| Transmission Fluid Capacity | 2.1gal | 7.8L |
| Front Axle/Diff Fluid Capacity | 4.3gal | 16L |
| Rear Axle/Diff Fluid Capacity | 4.3gal | 16L |
| Static Tipping Weight | 11356lb | 5151kg |
| Turning Radius | 14.5ft in | 4395.3mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 105amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 15.5-25 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 18.6mph | 30km/h |
| Max Speed - Reverse | 18.6mph | 30km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2500psi | 17238kPa |
|---|---|---|
| Pump Flow Capacity | 32.3gal/min | 122.3L/min |
| Raise Time | 5.3sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec | |
| Pump Type | Gear Pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.9ft in | 2711mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.63yd3 | 1.25m3 |
| Bucket Capacity - Struck | 1.3yd3 | 1m3 |
| Bucket Width | 7.71ft in | 2350mm |
| Breakout Force | 14595lb | 64.93kN |
06 Dimensions Dimensions
| Ground Clearance | 1.28ft in | 390mm |
|---|---|---|
| Length With Bucket On Ground | 19.72ft in | 6010mm |
| Width Over Tires | 7.14ft in | 2174mm |
| Height To Top Of Cab | 10.18ft in | 3100mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 11.26ft in | 3430mm |
| Reach At Max Lift And Dump | 2.69ft in | 819mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.