Specification sheet Skid Steer Loader Ref john-deere-3375-skid-steer-loader
John Deere 3375
The John Deere 3375 is a skid steer loader with an operating weight of 1,925 lb (873.17 kg), a 17 hp engine, a rated operating capacity of 675 lb (306 kg), and a 0.3 yd³ (0.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
1,925lb
873.17kg
Engine power
17hp
12.68kW
Net Power Rated operating capacity
675lb
306kg
Bucket capacity
0.3yd³
0.2m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 3375 sits at the compact end of its class:
- Operating weight 1,930 lb lighter than 100% (n=334)
- Engine power 17 hp less powerful than 99% (n=335)
- Rated operating capacity 680 lb lower-rated than 98% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | Series 220 | |
| Gross Power | 19hp | 14.2kw |
| Net Power | 17hp | 12.7kw |
| Power Measured @ | 3400rpm | |
| Displacement | 41.8cu in | 0.7L |
02 Operational Specification
| Operational Weight | 1925lb | 873.2kg |
|---|---|---|
| Fuel Capacity | 6gal | 22.7L |
| Operating Voltage | 12V |
03 Loader Specification
| Operating Load Rating | 675lb | 306kg |
|---|---|---|
| Bucket Capacity | 0.3yd3 | 0.2m3 |
04 Hydraulic Specification
| Pump Type | Open-center | |
|---|---|---|
| Pump Flow Capacity | 8gal/min | 30.3L/min |
| Relief Valve Pressure | 1600psi | 11032kPa |
05 Dimensions Dimensions
| Length With Bucket | 7.71ft in | 2350mm |
|---|---|---|
| Ground Clearance | 5.52in | 140mm |
| Height To Top Of Cab | 5.75ft in | 1750mm |
| Wheelbase | 2.66ft in | 810mm |
| Length W/O Bucket | 5.88ft in | 1790mm |
| Clearance At Max Lift And Dump | 6.24ft in | 1900mm |
| Reach At Max Lift And Dump | 20.87in | 530mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.