John Deere 333G
The John Deere 333G is a compact track loader with an operating weight of 12,110 lb (5,493 kg), a rated operating capacity of 3,703.8 lb (1,680 kg), and a tipping load of 10,580 lb (4,799 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere 333G sits at the heavy end of its class:
- Operating weight 12,110 lb heavier than 96% (n=182)
- Rated operating capacity 3,700 lb higher-rated than 83% (n=156)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Driveline Specification
| Engine Model | 4TNV94FHT | |
|---|---|---|
| Displacement | 189.2cu in | 3.1L |
| Engine Manufacturer | Yanmar | |
| Emission Rating | Tier 4 | |
| Rated Speed | 2500rpm | |
| Engine Output - Net | 96.6hp | 72kw |
| Engine Output - Gross | 100.1hp | 74.6kw |
| Track Shoe Width | 17.8in | 450mm |
| Aspiration | Turbo. intercooled | |
| Torque | 291.4lb ft | 395Nm |
02 Capacities Specification
| Fuel Tank - Diesel | 30.2gal | 114L |
|---|
03 Description Specification
| Lift Geometry | Vertical |
|---|
04 Performance Specification
| Ground Bearing Pressure | 5psi | 34.5kPa |
|---|---|---|
| Pump Flow | 25.1gal/min | 95L/min |
| Speed - Maximum | 7.9mph | 12.6km/h |
| Breakout - Lift | 8497.8lb | 37.8kN |
| Breakout - Bucket | 13893.2lb | 61.8kN |
| Hydraulic Power | 50.1hp | 37.3kw |
| System Pressure | 3450psi | 23786.9kPa |
| Tipping Load | 10580lb | 4799kg |
| Rated Operating Capacity | 3703.8lb | 1680kg |
| Hydraulic Power - Option, Kw (Hp) | 82.2hp | 61.3kw |
| Pump Flow - Option | 41.3gal/min | 156L/min |
05 Weights Specification
| Operating Weight | 12110lb | 5493kg |
|---|
06 Dimensions Dimensions
| Height To Top Of Cab | 7.22ft in | 2200mm |
|---|---|---|
| Ground Clearance | 9.45in | 240mm |
| Track Gauge | 5.25ft in | 1600mm |
| Length - No Bucket | 122.05in | 3100mm |
| Length - With Bucket | 146.07in | 3710mm |
| Rear Departure Angle | 31 | |
| Rollback - Ground Level | 35- | 35degrees |
| Dump Angle | 48 | |
| Width - No Bucket | 80.71in | 2050mm |
| Dump Height - Maximum | 105.91in | 2690mm |
| Height To Hinge Pin | 131.89in | 3350mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.