Specification sheet Compact Track Loader Ref john-deere-333e-multi-terrain-loader
John Deere 333E
The John Deere 333E is a compact track loader with an operating weight of 11,810.17 lb (5,357 kg), a 96.56 hp engine, a rated operating capacity of 3,302.53 lb (1,498 kg), and a tipping load of 9,433.6 lb (4,279 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,810.17lb
5,357kg
Engine power
96.56hp
72kW
Net Power Rated operating capacity
3,302.53lb
1,498kg
Tipping load
9,433.6lb
4,279kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere 333E sits at the heavy end of its class:
- Operating weight 11,810 lb heavier than 94% (n=182)
- Engine power 97 hp more powerful than 92% (n=167)
- Rated operating capacity 3,300 lb higher-rated than 75% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Yanmar | |
| Engine Model | 4TNV94CHT | |
| Gross Power | 100.1hp | 74.6kw |
| Net Power | 96.6hp | 72kw |
| Power Measured @ | 2500rpm | |
| Peak Torque | 291.4lb ft | 395Nm |
| Torque Measured @ | 1700rpm | |
| Displacement | 189.2cu in | 3.1L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 11810.2lb | 5357kg |
|---|---|---|
| Fuel Capacity | 25.5gal | 96.5L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps | |
| Max Speed - Low Range | 5.3mph | 8.5km/h |
| Max Speed - High Range | 7.9mph | 12.6km/h |
03 Loader Specification
| Breakout Force | 13887lb | 6299kg |
|---|---|---|
| Tipping Load | 9433.6lb | 4279kg |
| Operating Load | 3302.6lb | 1498kg |
| Boom Breakout Force | 6600lb | 29.4kN |
04 Hydraulic Specification
| Pump Flow | 25.1gal/min | 95L/min |
|---|---|---|
| Relief Valve Pressure | 3450.1psi | 23787kPa |
| Hydraulic Horsepower-Standard Flow | 50.1hp | 37.3kw |
05 Dimensions Dimensions
| Width Over Tracks | 1.48ft in | 450mm |
|---|---|---|
| Ground Clearance | 10.4in | 264.17mm |
| Dump Reach | 39.38in | 1000mm |
| Height To Top Of Rops | 84.65in | 2150mm |
| Dump Angle | 45degrees | |
| Length With Bucket | 12.01ft in | 3660mm |
| Length With Out Bucket | 10.01ft in | 3050mm |
| Hinge Pin Height, Maximum Height | 125.99in | 3200mm |
| Dump Height - Maximum | 101.97in | 2590mm |
| Turning Radius | 7.12ft in | 2170mm |
06 Undercarriage Dimensions
| Ground Pressure | 4.52psi | 31.1kPa |
|---|---|---|
| Number Of Track Rollers Per Side | 5 |
?Questions & answersfrom this machine's data
- How much does a John Deere 333E compact track loader weigh?
- A John Deere 333E compact track loader has an operating weight of 11,810.2 lb (5,357 kg).
- How much can a John Deere 333E compact track loader lift?
- A John Deere 333E compact track loader has a rated operating capacity of 3,302.5 lb (1,498 kg).
- What engine does a John Deere 333E compact track loader have?
- A John Deere 333E compact track loader is powered by a Yanmar 4TNV94CHT engine producing 96.6 hp (72 kW).
- How much fuel does a John Deere 333E compact track loader hold?
- A John Deere 333E compact track loader has a fuel capacity of 25.5 gal (96.5 L).
- What is the ground clearance of a John Deere 333E compact track loader?
- A John Deere 333E compact track loader has a ground clearance of 10.4 in (264.2 mm).
- How long is a John Deere 333E compact track loader?
- A John Deere 333E compact track loader has an overall length of 12 ft (3,660 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.