Specification sheet Compact Track Loader Ref john-deere-333d-multi-terrain-loader
John Deere 333D
The John Deere 333D is a compact track loader with an operating weight of 11,109.1 lb (5,039 kg), a 89.45 hp engine, a rated operating capacity of 4,728.92 lb (2,145 kg), and a tipping load of 9,425 lb (4,275.2 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,109.1lb
5,039kg
Engine power
89.45hp
66.7kW
Net Power Rated operating capacity
4,728.92lb
2,145kg
Tipping load
9,425lb
4,275.2kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere 333D sits at the heavy end of its class:
- Operating weight 11,110 lb heavier than 87% (n=182)
- Engine power 89 hp more powerful than 83% (n=167)
- Rated operating capacity 4,730 lb higher-rated than 97% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 5 | |
|---|---|---|
| Engine Make | John Deere | |
| Engine Model | E 5030HT | |
| Gross Power | 95.4hp | 71.1kw |
| Net Power | 89.5hp | 66.7kw |
| Power Measured @ | 2400rpm | |
| Peak Torque | 251.6lb ft | 341Nm |
| Torque Measured @ | 1950rpm | |
| Displacement | 183.1cu in | 3L |
02 Operational Specification
| Operating Weight | 11109.1lb | 5039kg |
|---|---|---|
| Fuel Capacity | 29.4gal | 111L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps | |
| Max Speed - Low Range | 5.3mph | 8.5km/h |
| Max Speed - High Range | 7.9mph | 12.6km/h |
03 Loader Specification
| Dump Height | 8.6ft in | 2.7m |
|---|---|---|
| Tipping Load | 9425lb | 4275.2kg |
| Operating Load | 4729lb | 2145kg |
| Boom Breakout Force | 673527.6lb | 2996kN |
| Tipping Angle | 50degrees | |
| Bucket Breakout Force | 13875lb | 61.8kN |
04 Hydraulic Specification
| Pump Flow | 25.1gal/min | 95L/min |
|---|---|---|
| Hydraulic Horsepower-Standard Flow | 53hp | 39.5kw |
05 Dimensions Dimensions
| Width Over Tracks | 6.73ft in | 2050mm |
|---|---|---|
| Ground Clearance | 10.44in | 265mm |
| Reach At Max Lift And Dump | 2.69ft in | 819mm |
| Overall Height | 10.5ft in | 3200mm |
| Dump Angle | 45 degress | |
| Length With Bucket | 11.82ft in | 3600mm |
| Length With Out Bucket | 9.81ft in | 2990mm |
| Turning Radius | 7.12ft in | 2170mm |
06 Undercarriage Dimensions
| Ground Pressure | 4.52psi | 31.1kPa |
|---|---|---|
| Width Of Track | 17.72in | 450mm |
| Number Of Track Rollers Per Side | 5 |
?Questions & answersfrom this machine's data
- How much does a John Deere 333D compact track loader weigh?
- A John Deere 333D compact track loader has an operating weight of 11,109.1 lb (5,039 kg).
- How much can a John Deere 333D compact track loader lift?
- A John Deere 333D compact track loader has a rated operating capacity of 4,728.9 lb (2,145 kg).
- What engine does a John Deere 333D compact track loader have?
- A John Deere 333D compact track loader is powered by a John Deere E 5030HT engine producing 89.5 hp (66.7 kW).
- How much fuel does a John Deere 333D compact track loader hold?
- A John Deere 333D compact track loader has a fuel capacity of 29.4 gal (111 L).
- What is the ground clearance of a John Deere 333D compact track loader?
- A John Deere 333D compact track loader has a ground clearance of 10.4 in (265 mm).
- How long is a John Deere 333D compact track loader?
- A John Deere 333D compact track loader has an overall length of 11.8 ft (3,600 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.