Specification sheet Skid Steer Loader Ref john-deere-332e-skid-steer-loader
John Deere 332E
The John Deere 332E is a skid steer loader with an operating weight of 3,200 lb (1,451.5 kg), a 97 hp engine, and a rated operating capacity of 3,350 lb (1,519.54 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
3,200lb
1,451.5kg
Engine power
97hp
72.34kW
Net Power Rated operating capacity
3,350lb
1,519.54kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 332E sits at the compact end of its class:
- Operating weight 3,200 lb lighter than 94% (n=334)
- Engine power 97 hp more powerful than 99% (n=335)
- Rated operating capacity 3,350 lb higher-rated than 96% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 4 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Make | Yanmar | |
| Engine Model | 4TNV94CHT | |
| Gross Power | 100hp | 74.6kw |
| Air Cleaner | Dry dual element | |
| Net Power | 97hp | 72.4kw |
| Net Torque | 291.4lb ft | 395Nm |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1700rpm | |
| Net Torque Rise | 47% | |
| Aspiration | Turbocharged, inter cooled | |
| Displacement | 189.2cu in | 3.1L |
02 Operational Specification
| Operational Weight | 3200lb | 1451.5kg |
|---|---|---|
| Fuel Capacity | 25.5gal | 96.5L |
| Max Speed | 12mph | 19.4km/h |
| Tire Size | 14 x 17.5 14 PR Hauler | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Rollback - Ground Level | 35degrees | |
|---|---|---|
| Dump Height | 8497.4ft in | 2590m |
| Breakout Force (Iso 14397) | 13875lb | 6293.6kg |
| Tipping Load (Iso 14397) | 6400lb | 2903kg |
| Bucket Breakout Force (Iso 14397) | 13875lb | 6293.6kg |
| Operating Load Rating | 3350lb | 1519.6kg |
| Boom Breakout Force | 6600lb | 29.4kN |
| Dump Angle @ Max. Height | 45degrees | |
| Width Without Bucket | 6.6ft in | 2m |
04 Hydraulic Specification
| Pump Flow Capacity | 25.1gal/min | 95L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 6830lb ft | 9260.3Nm |
|---|---|---|
| Tractive Effort | 9300lb ft | 12609.2Nm |
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 50hp | 37.3kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 74hp | 55.2kw |
07 Dimensions Dimensions
| Length With Bucket | 12.01ft in | 3660mm |
|---|---|---|
| Ground Clearance | 11.03in | 280mm |
| Wheelbase | 4.04ft in | 1230mm |
| Length W/O Bucket | 10.01ft in | 3050mm |
| Reach At Max Lift And Dump | 38.59in | 980mm |
| Hinge Pin Height, Maximum Height | 127.17in | 3230mm |
| Height To Top Of Rops | 84.65in | 2150mm |
| Turning Radius - Tts870 | 7.12ft in | 2170mm |
?Questions & answersfrom this machine's data
- How much does a John Deere 332E skid steer weigh?
- A John Deere 332E skid steer has an operating weight of 3,200 lb (1,451.5 kg).
- How much can a John Deere 332E skid steer lift?
- A John Deere 332E skid steer has a rated operating capacity of 3,350 lb (1,519.5 kg).
- What engine does a John Deere 332E skid steer have?
- A John Deere 332E skid steer is powered by a Yanmar 4TNV94CHT engine producing 97 hp (72.3 kW).
- What is the ground clearance of a John Deere 332E skid steer?
- A John Deere 332E skid steer has a ground clearance of 11 in (280 mm).
- How long is a John Deere 332E skid steer?
- A John Deere 332E skid steer has an overall length of 12 ft (3,660 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.