Specification sheet Skid Steer Loader Ref john-deere-332d-skid-steer-loader
John Deere 332D
The John Deere 332D is a skid steer loader with an operating weight of 9,177.85 lb (4,163 kg), a 89 hp engine, and a rated operating capacity of 3,350 lb (1,519.54 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,177.85lb
4,163kg
Engine power
89hp
66.37kW
Net Power Rated operating capacity
3,350lb
1,519.54kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 332D sits at the heavy end of its class:
- Operating weight 9,180 lb heavier than 94% (n=334)
- Engine power 89 hp more powerful than 96% (n=335)
- Rated operating capacity 3,350 lb higher-rated than 96% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA Tier 3/EU Stage IIIA | |
|---|---|---|
| Number Of Cylinders | 5 | |
| Engine Make | John Deere PowerTech | |
| Engine Model | E 5030HT | |
| Gross Power | 95hp | 70.9kw |
| Air Cleaner | Dry dual element | |
| Net Torque | 251.6lb ft | 341Nm |
| Net Power | 89hp | 66.4kw |
| Power Measured @ | 2400rpm | |
| Torque Measured @ | 1950rpm | |
| Net Torque Rise | 36.9% | |
| Aspiration | Turbocharged and intercooled | |
| Displacement | 183.1cu in | 3L |
02 Operational Specification
| Operational Weight | 9177.9lb | 4163kg |
|---|---|---|
| Hydraulic System Fluid Capacity | 25.1gal | 95L |
| Max Speed | 12mph | 19.4km/h |
| Tire Size | 14 x 17.5 14 PR Hauler | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Rollback - Ground Level | 35degrees | |
|---|---|---|
| Tipping Load (Iso 14397) | 6400lb | 2903kg |
| Bucket Breakout Force (Iso 14397) | 13875lb | 6293.6kg |
| Operating Load Rating | 3350lb | 1519.6kg |
| Boom Breakout Force | 6600lb | 29.4kN |
| Dump Angle @ Max. Height | 45degrees | |
| Width Without Bucket | 6.6ft in | 2m |
04 Hydraulic Specification
| Pump Flow Capacity | 38.1gal/min | 144L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 6830lb ft | 9260.3Nm |
|---|---|---|
| Tractive Effort | 9300lb ft | 12609.2Nm |
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 40hp | 29.9kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 61hp | 45.5kw |
| System Pressure At Couplers | 3450psi | 23786.9kPa |
07 Dimensions Dimensions
| Ground Clearance | 10.83in | 275mm |
|---|---|---|
| Wheelbase | 4.04ft in | 1230mm |
| Length W/O Bucket | 9.81ft in | 2990mm |
| Reach At Max Lift And Dump | 31.62in | 803mm |
| Turning Radius - Tts870 | 7.12ft in | 2170mm |
| Length | 141.74in | 360cm |
| Height To Top Of Rops | 84.65in | 2150mm |
| Hinge Pin Height, Maximum Height | 127.17in | 3230mm |
| Angle Of Departure | 31degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.