Specification sheet Compact Track Loader Ref john-deere-331g-multi-terrain-loader

John Deere 331G

The John Deere 331G is a compact track loader with an operating weight of 11,911.6 lb (5,403 kg), a rated operating capacity of 3,102 lb (1,407 kg), and a tipping load of 8,864.8 lb (4,021 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
11,911.6lb
5,403kg
Rated operating capacity
3,102lb
1,407kg
Tipping load
8,864.8lb
4,021kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the John Deere 331G sits at the heavy end of its class:

  • Operating weight 11,910 lb heavier than 95% (n=182)
  • Rated operating capacity 3,100 lb higher-rated than 69% (n=156)

Not positioned on engine power — withheld or unpublished for this machine.

◇Scale drawingdrawn to scale · mm

2200B240C3710A
Side elevation

01 Driveline Specification

Engine Model 4TNV94FHT
Displacement 189.2cu in 3.1L
Engine Manufacturer Yanmar
Emission Rating Tier 4
Rated Speed 2500rpm
Engine Output - Net 88.6hp 66kw
Engine Output - Gross 91.2hp 68kw
Track Shoe Width 15.8in 400mm
Aspiration Turbo. intercooled
Torque 281.8lb ft 382Nm

02 Capacities Specification

Fuel Tank - Diesel 30.2gal 114L

03 Description Specification

Lift Geometry Vertical

04 Performance Specification

Ground Bearing Pressure 5.6psi 38.1kPa
Pump Flow 21.2gal/min 80L/min
Speed - Maximum 7.9mph 12.6km/h
Breakout - Lift 6991.6lb 31.1kN
Breakout - Bucket 9329.6lb 41.5kN
Hydraulic Power 42.1hp 31.4kw
System Pressure 3450psi 23786.9kPa
Tipping Load 8864.8lb 4021kg
Rated Operating Capacity 3102lb 1407kg
Hydraulic Power - Option, Kw (Hp) 72.6hp 54.2kw
Pump Flow - Option 36.5gal/min 138L/min

05 Weights Specification

Operating Weight 11911.6lb 5403kg

06 Dimensions Dimensions

Height To Top Of Cab 7.22ft in 2200mm
Ground Clearance 9.45in 240mm
Track Gauge 5.25ft in 1600mm
Length - No Bucket 122.05in 3100mm
Length - With Bucket 146.07in 3710mm
Rear Departure Angle 31
Rollback - Ground Level 35- 35degrees
Dump Angle 48
Width - No Bucket 78.75in 2000mm
Dump Height - Maximum 105.91in 2690mm
Height To Hinge Pin 131.89in 3350mm

?Questions & answersfrom this machine's data

How much does a John Deere 331G compact track loader weigh?
A John Deere 331G compact track loader has an operating weight of 11,911.6 lb (5,403 kg).
How much can a John Deere 331G compact track loader lift?
A John Deere 331G compact track loader has a rated operating capacity of 3,102 lb (1,407 kg).
What is the ground clearance of a John Deere 331G compact track loader?
A John Deere 331G compact track loader has a ground clearance of 9.5 in (240 mm).

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.