John Deere 330G Skid Steer _JD
The John Deere 330G Skid Steer _JD is a skid steer loader with an operating weight of 9,909.8 lb (4,495 kg), and a rated operating capacity of 3,002.7 lb (1,362 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 330G Skid Steer _JD sits at the heavy end of its class:
- Operating weight 9,910 lb heavier than 97% (n=334)
- Rated operating capacity 3,000 lb higher-rated than 93% (n=288)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Driveline Specification
| Engine Model | 4TNV94FHT | |
|---|---|---|
| Displacement | 189.2cu in | 3.1L |
| Engine Manufacturer | Yanmar | |
| Emission Rating | Tier 4 | |
| Rated Engine Speed | 2500rpm | |
| Sae Net Power | 66hp | 49.3kw |
| Sae Gross Power | 68hp | 50.8kw |
| Max. Gross Torque | 382 (281.8) | |
| Drive Chain Rating [Ansi] | 100 - HD | |
| Tire Size - Standard | 14 x 17.5 - 12PR Extra Wall | |
| Aspiration | Turbo. Intercooled |
02 Capacities Specification
| Fuel Tank - Diesel | 25.5gal | 96.5L |
|---|
03 Description Specification
| Lift Geometry | Vertical | |
|---|---|---|
| Fleet Management | Yes | |
| Precision Guidance | No | |
| Proximity Guidance | No |
04 Performance Specification
| Rated Operating Capacity - Optional Counterweight | 3152.7lb | 1430kg |
|---|---|---|
| Tipping Capacity (Sae) | 6005.4lb | 2724kg |
| Axle Torque - Maximum | 8480 (6235) | |
| Speed - Maximum | 12mph | 19.3km/h |
| Breakout - Lift | 6991.6lb | 31.1kN |
| Breakout - Bucket | 9329.6lb | 41.5kN |
| Hydraulic Power | 42.1hp | 31.4kw |
| Pump Output | 21.2gal/min | 80L/min |
| Pump Flow -Option | 36.5gal/min | 138L/min |
| System Pressure | 3450psi | 23786.9kPa |
| Rated Operating Capacity | 3002.7lb | 1362kg |
| Hydraulic Power - Option, Kw (Hp) | 72.6hp | 54.2kw |
05 Weights Specification
| Operating Weight | 9909.8lb | 4495kg |
|---|
06 Dimensions Dimensions
| Ground Clearance | 9.85in | 250mm |
|---|---|---|
| Wheelbase | 4.17ft in | 1270mm |
| Height To Hinge Pin | 131.89in | 3350mm |
| Length - No Bucket | 122.05in | 3100mm |
| Length - With Bucket | 146.07in | 3710mm |
| Overall Height | 7.19ft in | 2190mm |
| Rear Departure Angle | 29 | |
| Reach - Max Dump Height | 27.96in | 710mm |
| Rollback - Ground Level | 35- | 35degrees |
| Dump Angle | 48 | |
| Width - No Bucket | 77.96in | 1980mm |
| Dump Height - Maximum | 105.91in | 2690mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.