Specification sheet Skid Steer Loader Ref john-deere-328d-skid-steer-loader
John Deere 328D
The John Deere 328D is a skid steer loader with an operating weight of 8,408.44 lb (3,814 kg), a 80 hp engine, and a rated operating capacity of 2,950 lb (1,338.1 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,408.44lb
3,814kg
Engine power
80hp
59.66kW
Net Power Rated operating capacity
2,950lb
1,338.1kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 328D sits at the heavy end of its class:
- Operating weight 8,410 lb heavier than 87% (n=334)
- Engine power 80 hp more powerful than 80% (n=335)
- Rated operating capacity 2,950 lb higher-rated than 90% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA Tier 3/EU Stage IIIA | |
|---|---|---|
| Number Of Cylinders | 5 | |
| Engine Make | John Deere PowerTech | |
| Engine Model | E 5030HT | |
| Gross Power | 85hp | 63.4kw |
| Air Cleaner | Dry dual element | |
| Net Torque | 221.3lb ft | 300Nm |
| Net Power | 80hp | 59.7kw |
| Power Measured @ | 2800rpm | |
| Torque Measured @ | 2000rpm | |
| Net Torque Rise | 43% | |
| Aspiration | Turbocharged and intercooled | |
| Displacement | 183.1cu in | 3L |
02 Operational Specification
| Operational Weight | 8408.5lb | 3814kg |
|---|---|---|
| Hydraulic System Fluid Capacity | 21.2gal | 80L |
| Max Speed | 12mph | 19.4km/h |
| Tire Size | 14 x 17.5 12 PR Extra Wall | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Rollback - Ground Level | 35degrees | |
|---|---|---|
| Dump Height | 8.5ft in | 2.6m |
| Tipping Load (Iso 14397) | 5600lb | 2540.2kg |
| Bucket Breakout Force (Iso 14397) | 7750lb | 3515.4kg |
| Operating Load Rating | 2950lb | 1338.1kg |
| Boom Breakout Force | 5000lb | 22.3kN |
| Dump Angle @ Max. Height | 45degrees | |
| Width Without Bucket | 6.4ft in | 2m |
04 Hydraulic Specification
| Pump Flow Capacity | 32.3gal/min | 122L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 6235lb ft | 8453.6Nm |
|---|---|---|
| Tractive Effort | 8610lb ft | 11673.6Nm |
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 46hp | 34.4kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 77hp | 57.5kw |
| System Pressure At Couplers | 3450psi | 23786.9kPa |
07 Dimensions Dimensions
| Ground Clearance | 11.62in | 295mm |
|---|---|---|
| Length W/O Bucket | 9.81ft in | 2990mm |
| Reach At Max Lift And Dump | 31.34in | 796mm |
| Length | 141.74in | 360cm |
| Angle Of Departure | 31degrees | |
| Turning Radius - Tts870 | 7.12ft in | 2170mm |
| Height To Top Of Rops | 84.65in | 2150mm |
| Hinge Pin Height, Maximum Height | 126.78in | 3220mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.