Specification sheet Skid Steer Loader Ref john-deere-326e-skid-steer-loader
John Deere 326E
The John Deere 326E is a skid steer loader with an operating weight of 8,200 lb (3,719.46 kg), a 69 hp engine, and a rated operating capacity of 2,850 lb (1,292.74 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,200lb
3,719.46kg
Engine power
69hp
51.46kW
Net Power Rated operating capacity
2,850lb
1,292.74kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 326E sits above the median for its class:
- Operating weight 8,200 lb heavier than 84% (n=334)
- Engine power 69 hp more powerful than 57% (n=335)
- Rated operating capacity 2,850 lb higher-rated than 90% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 4 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Make | Yanmar | |
| Engine Model | 4TNV98CT standard | |
| Gross Power | 72hp | 53.7kw |
| Air Cleaner | Dry dual element | |
| Net Power | 69hp | 51.5kw |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1625rpm | |
| Net Torque Rise | 36% | |
| Displacement | 201.4cu in | 3.3L |
| Bore | 3.9in | 98mm |
| Stroke | 4.4in | 110mm |
02 Operational Specification
| Operational Weight | 8200lb | 3719.5kg |
|---|---|---|
| Fuel Capacity | 24.4gal | 92L |
| Max Speed | 11mph | 17.8km/h |
| Hydraulic System Fluid Capacity | 21.2gal | 80L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Rollback - Ground Level | 35degrees | |
|---|---|---|
| Tipping Load (Iso 14397) | 5400lb | 2449.4kg |
| Bucket Breakout Force (Iso 14397) | 7750lb | 3515.4kg |
| Operating Load Rating | 2850lb | 1292.8kg |
| Boom Breakout Force | 5000lb | 22.3kN |
| Dump Angle @ Max. Height | 45degrees | |
| Width Without Bucket | 6.1ft in | 1.9m |
04 Hydraulic Specification
| Pump Flow Capacity | 33.1gal/min | 125L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 5680lb ft | 7701.1Nm |
|---|
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 42hp | 31.4kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 63hp | 47kw |
| System Pressure At Couplers | 3450psi | 23786.9kPa |
07 Dimensions Dimensions
| Length With Bucket | 12.9ft in | 3930mm |
|---|---|---|
| Ground Clearance | 9.85in | 250mm |
| Wheelbase | 4.04ft in | 1230mm |
| Length W/O Bucket | 10.01ft in | 3050mm |
| Reach At Max Lift And Dump | 40.16in | 1020mm |
| Angle Of Departure | 25degrees | |
| Hinge Pin Height, Maximum Height | 125.2in | 3180mm |
| Turning Radius - Tts870 | 7.12ft in | 2170mm |
| Height To Top Of Rops | 83.47in | 2120mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.