Specification sheet Skid Steer Loader Ref john-deere-326d-skid-steer-loader
John Deere 326D
The John Deere 326D is a skid steer loader with an operating weight of 8,132.86 lb (3,689 kg), a 70 hp engine, and a rated operating capacity of 1,249 lb (566.54 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,132.86lb
3,689kg
Engine power
70hp
52.2kW
Net Power Rated operating capacity
1,249lb
566.54kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 326D sits above the median for its class:
- Operating weight 8,130 lb heavier than 83% (n=334)
- Engine power 70 hp more powerful than 59% (n=335)
- Rated operating capacity 1,250 lb lower-rated than 90% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA Interim Tier 4/EU Stage IIIB | |
|---|---|---|
| Number Of Cylinders | 5 | |
| Engine Make | John Deere PowerTech | |
| Engine Model | E 5030HT | |
| Gross Power | 74hp | 55.2kw |
| Air Cleaner | Dry dual element | |
| Net Torque | 188.9lb ft | 256Nm |
| Net Power | 70hp | 52.2kw |
| Power Measured @ | 2000rpm | |
| Torque Measured @ | 2050rpm | |
| Aspiration | Turbocharged and intercooled | |
| Net Torque Rise | 36% | |
| Displacement | 183.1cu in | 3L |
02 Operational Specification
| Operational Weight | 8132.9lb | 3689kg |
|---|---|---|
| Fuel Capacity | 29.2gal | 110.5L |
| Hydraulic System Fluid Capacity | 21.2gal | 80L |
| Max Speed | 11mph | 17.8km/h |
| Tire Size | 12 x 16.5 10 PR Extra Wall | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Rollback - Ground Level | 35degrees | |
|---|---|---|
| Dump Height | 8.4ft in | 2.6m |
| Breakout Force (Iso 14397) | 7750lb | 3515.4kg |
| Tipping Load (Iso 14397) | 5200lb | 2358.7kg |
| Operating Load Rating | 1249lb | 566.6kg |
| Boom Breakout Force | 5000lb | 22.3kN |
| Width Without Bucket | 6.1ft in | 1.9m |
04 Hydraulic Specification
| Pump Flow Capacity | 33.1gal/min | 125L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 5697.7lb ft | 7725Nm |
|---|---|---|
| Tractive Effort | 8725lb ft | 11829.6Nm |
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 46hp | 34.4kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 72hp | 53.7kw |
| System Pressure At Couplers | 3450psi | 23786.9kPa |
07 Dimensions Dimensions
| Ground Clearance | 9.65in | 245mm |
|---|---|---|
| Wheelbase | 4.04ft in | 1230mm |
| Length W/O Bucket | 9.81ft in | 2990mm |
| Reach At Max Lift And Dump | 33in | 838mm |
| Turning Radius - Tts870 | 7.12ft in | 2170mm |
| Length | 141.74in | 360cm |
| Height To Top Of Rops | 83.47in | 2120mm |
| Hinge Pin Height, Maximum Height | 125.2in | 3180mm |
| Angle Of Departure | 28degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.