John Deere 325G
The John Deere 325G is a compact track loader with an operating weight of 9,508.6 lb (4,313 kg), a rated operating capacity of 2,592.7 lb (1,176 kg), and a tipping load of 7,407.6 lb (3,360 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere 325G sits in the middle of its class:
- Operating weight 9,510 lb heavier than 53% (n=182)
- Rated operating capacity 2,590 lb lower-rated than 52% (n=156)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Driveline Specification
| Engine Model | 4TNV98CT | |
|---|---|---|
| Displacement | 201.4cu in | 3.3L |
| Engine Manufacturer | Yanmar | |
| Emission Rating | Tier 4 | |
| Rated Speed | 2500rpm | |
| Engine Output - Net | 70hp | 52.2kw |
| Engine Output - Gross | 74hp | 55.2kw |
| Track Shoe Width | 12.6in | 320mm |
| Aspiration | Turbo | |
| Torque | 206.6lb ft | 280Nm |
02 Capacities Specification
| Fuel Tank - Diesel | 20.9gal | 79L |
|---|
03 Description Specification
| Lift Geometry | Vertical |
|---|
04 Performance Specification
| Ground Bearing Pressure | 5.7psi | 39.4kPa |
|---|---|---|
| Pump Flow | 18.5gal/min | 70L/min |
| Speed - Maximum | 5.8mph | 9.4km/h |
| Breakout - Lift | 5238.1lb | 23.3kN |
| Breakout - Bucket | 8745.1lb | 38.9kN |
| Hydraulic Power | 36.8hp | 27.5kw |
| System Pressure | 3450psi | 23786.9kPa |
| Speed - Maximum Option | 8.2mph | 13.2km/h |
| Tipping Load | 7407.6lb | 3360kg |
| Rated Operating Capacity | 2592.7lb | 1176kg |
| Hydraulic Power - Option, Kw (Hp) | 53.1hp | 39.6kw |
| Pump Flow - Option | 26.7gal/min | 101L/min |
05 Weights Specification
| Operating Weight | 9508.6lb | 4313kg |
|---|
06 Dimensions Dimensions
| Height To Top Of Cab | 6.76ft in | 2060mm |
|---|---|---|
| Ground Clearance | 9.45in | 240mm |
| Track Gauge | 4.93ft in | 1500mm |
| Length - No Bucket | 112.21in | 2850mm |
| Length - With Bucket | 136.23in | 3460mm |
| Rear Departure Angle | 30.5 | |
| Rollback - Ground Level | 34- | 34degrees |
| Dump Angle | 41 | |
| Width - No Bucket | 71.66in | 1820mm |
| Dump Height - Maximum | 101.97in | 2590mm |
| Height To Hinge Pin | 125.99in | 3200mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.