Specification sheet Wheel Loader Ref john-deere-324k-wheel-loader
John Deere 324K
The John Deere 324K is a wheel loader with an operating weight of 14,087.54 lb (6,390 kg), and a 61 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
14,087.54lb
6,390kg
Engine power
61hp
45.5kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 324K sits above the median for its class:
- Operating weight 14,090 lb heavier than 61% (n=374)
- Engine power 61 hp less powerful than 62% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Pump | Gear | |
|---|---|---|
| Engine Output-Net | 70hp | 52.2kw |
| Transmission Type | Hydrostatic | |
| Engine Make | YANMAR | |
| Engine Model | 4TNC98CT | |
| Net Power | 61hp | 45.5kw |
| Torque | 206lb ft | 279.3Nm |
| Rated Speed | 2400rpm | |
| Displacement | 201.4cu in | 3.3L |
| System Voltage | 12V | |
| Emission Level | Tier 4 | |
| Alternator | 80amps |
02 Capacities Specification
| Hydraulic Tank | 21.2gal | 80L |
|---|---|---|
| Heaped Capacity | 1.5yd3 | 1.1m3 |
03 Operational Specification
| Operating Weight | 14087.6lb | 6390kg |
|---|---|---|
| Fuel Capacity | 21.4gal | 81L |
| Front Axle/Diff Fluid Capacity | 2gal | 7.3L |
| Rear Axle/Diff Fluid Capacity | 1.8gal | 6.7L |
| Tire Size | 405 / 70 R20 |
04 Transmission Specification
| Pump Flow | 24.6gal/min | 93L/min |
|---|---|---|
| System Pressure | 2750psi | 18960.6kPa |
05 Brakes Specification
| Parking Brake | Wet Disc | |
|---|---|---|
| Actuation | Hydraulic | |
| Brakes Type | Wet Disc / Drum | |
| Service Brake | All Wheels |
06 Bucket Dimensions
| Breakout - Bucket | 5608 (12364) kgf (Ibf) | |
|---|---|---|
| Bucket Capacity - Smallest | 1.44yd3 | 1.11m3 |
| Largest Bucket Capacity | 2.1yd3 | 1.6m3 |
07 Dimensions Dimensions
| Ground Clearance | 15.2in | 386mm |
|---|---|---|
| Width Over Tires | 6.96ft in | 2120mm |
| Wheelbase | 7.55ft in | 2300mm |
| Turning Circle | 27.5ft in | 8380mm |
| Overall Length (W/Bucket) | 18.84ft in | 5740mm |
| Height Over Cab | 9.16ft in | 2790mm |
| Height - Pivot Pin | 11ft in | 3350mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.