Specification sheet Wheel Loader Ref john-deere-324h-wheel-loader
John Deere 324H
The John Deere 324H is a wheel loader with an operating weight of 15,520 lb (7,039.76 kg), a 80 hp engine, and a 1.7 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
15,520lb
7,039.76kg
Engine power
80hp
59kW
Net Power Bucket capacity
1.7yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 324H sits above the median for its class:
- Operating weight 15,520 lb heavier than 66% (n=374)
- Engine power 80 hp more powerful than 63% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 68% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4045DF | |
| Net Power | 80hp | 59kw |
| Gross Power | 84hp | 62kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 223lb ft | 302Nm |
| Displacement | 276cu in | 4.5L |
| Torque Measured @ | 1200rpm | |
| Aspiration | Natural |
02 Operational Specification
| Operating Weight | 15520lb | 7039.8kg |
|---|---|---|
| Fuel Capacity | 37gal | 140L |
| Hydraulic System Fluid Capacity | 17.2gal | 65L |
| Engine Oil Fluid Capacity | 3.2gal | 12L |
| Cooling System Fluid Capacity | 4gal | 15L |
| Front Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Rear Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Static Tipping Weight | 10595.5lb | 4806kg |
| Turning Radius | 12.5ft in | 3790mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 15.5-25 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 17.4mph | 28.1km/h |
| Max Speed - Reverse | 17.4mph | 28km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 30gal/min | 115L/min |
| Raise Time | 4.3sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3.3sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.01ft in | 2746mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.7yd3 | 1.3m3 |
| Bucket Capacity - Struck | 1.4yd3 | 1.08m3 |
| Bucket Width | 7.88ft in | 2400mm |
| Breakout Force | 17754lb | 78.98kN |
06 Dimensions Dimensions
| Ground Clearance | 1.17ft in | 355mm |
|---|---|---|
| Length With Bucket On Ground | 19.82ft in | 6040mm |
| Width Over Tires | 6.93ft in | 2110mm |
| Height To Top Of Cab | 9.93ft in | 3025mm |
| Wheelbase | 8.21ft in | 2500mm |
| Hinge Pin - Max Height | 10.97ft in | 3343mm |
| Reach At Max Lift And Dump | 2.71ft in | 825mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.