John Deere 320G_ Skid Steer _JD
The John Deere 320G_ Skid Steer _JD is a skid steer loader with an operating weight of 15,763.1 lb (7,150 kg), and a rated operating capacity of 2,191.4 lb (994 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 320G_ Skid Steer _JD sits at the heavy end of its class:
- Operating weight 15,760 lb heavier than 100% (n=334)
- Rated operating capacity 2,190 lb higher-rated than 65% (n=288)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Driveline Specification
| Engine Model | 4TNV98C | |
|---|---|---|
| Displacement | 202.6cu in | 3.4L |
| Engine Manufacturer | Yanmar | |
| Emission Rating | Tier 4 | |
| Rated Engine Speed | 2500rpm | |
| Sae Net Power | 66hp | 49.3kw |
| Sae Gross Power | 69hp | 51.5kw |
| Max. Gross Torque | 241 (178) | |
| Drive Chain Rating [Ansi] | 80 - HD | |
| Tire Size - Standard | 12 x 16.5 - 12PR SKS | |
| Aspiration | Naturally Aspirated |
02 Capacities Specification
| Fuel Tank - Diesel | 20.9gal | 79L |
|---|
03 Description Specification
| Lift Geometry | Vertical | |
|---|---|---|
| Fleet Management | Yes | |
| Precision Guidance | No | |
| Proximity Guidance | No |
04 Performance Specification
| Rated Operating Capacity - Optional Counterweight | 2352.4lb | 1067kg |
|---|---|---|
| Tipping Capacity (Sae) | 4385lb | 1989kg |
| Axle Torque - Maximum | 6771 (4994) | |
| Speed - Maximum | 6.9mph | 11.2km/h |
| Breakout - Lift | 3709.4lb | 16.5kN |
| Breakout - Bucket | 5980lb | 26.6kN |
| Hydraulic Power | 38.6hp | 28.8kw |
| Pump Output | 20.7gal/min | 78L/min |
| Pump Flow -Option | 29.6gal/min | 112L/min |
| System Pressure | 3250psi | 22408kPa |
| Speed - Maximum Option | 11.1mph | 17.9km/h |
| Rated Operating Capacity | 2191.4lb | 994kg |
| Hydraulic Power - Option, Kw (Hp) | 55.5hp | 41.4kw |
05 Weights Specification
| Operating Weight | 15763.1lb | 7150kg |
|---|
06 Dimensions Dimensions
| Ground Clearance | 9.45in | 240mm |
|---|---|---|
| Wheelbase | 3.68ft in | 1120mm |
| Height To Hinge Pin | 122.05in | 3100mm |
| Length - No Bucket | 112.21in | 2850mm |
| Length - With Bucket | 136.23in | 3460mm |
| Overall Height | 6.76ft in | 2060mm |
| Rear Departure Angle | 28 | |
| Reach - Max Dump Height | 29.14in | 740mm |
| Rollback - Ground Level | 33- | 33degrees |
| Dump Angle | 43 | |
| Width - No Bucket | 66.93in | 1700mm |
| Dump Height - Maximum | 97.64in | 2480mm |
?Questions & answersfrom this machine's data
- How much does a John Deere 320G_ Skid Steer _JD skid steer weigh?
- A John Deere 320G_ Skid Steer _JD skid steer has an operating weight of 15,763.1 lb (7,150 kg).
- How much can a John Deere 320G_ Skid Steer _JD skid steer lift?
- A John Deere 320G_ Skid Steer _JD skid steer has a rated operating capacity of 2,191.4 lb (994 kg).
- What is the ground clearance of a John Deere 320G_ Skid Steer _JD skid steer?
- A John Deere 320G_ Skid Steer _JD skid steer has a ground clearance of 9.5 in (240 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.