Specification sheet Skid Steer Loader Ref john-deere-320e-skid-steer-loader
John Deere 320E
The John Deere 320E is a skid steer loader with an operating weight of 7,156.21 lb (3,246 kg), a 66 hp engine, and a rated operating capacity of 2,350 lb (1,065.95 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,156.21lb
3,246kg
Engine power
66hp
49.22kW
Net Power Rated operating capacity
2,350lb
1,065.95kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 320E sits above the median for its class:
- Operating weight 7,160 lb heavier than 62% (n=334)
- Engine power 66 hp more powerful than 53% (n=335)
- Rated operating capacity 2,350 lb higher-rated than 71% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 4 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Make | Yanmar | |
| Engine Model | 4TNV98C standard | |
| Gross Power | 69hp | 51.5kw |
| Air Cleaner | Dry dual element | |
| Net Torque | 177.8lb ft | 241Nm |
| Net Power | 66hp | 49.3kw |
| Power Measured @ | 2500rpm | |
| Torque Measured @ | 1625rpm | |
| Net Torque Rise | 22% | |
| Aspiration | Naturally aspirated | |
| Displacement | 201.4cu in | 3.3L |
02 Operational Specification
| Operational Weight | 7156.3lb | 3246kg |
|---|---|---|
| Fuel Capacity | 20.1gal | 76L |
| Hydraulic System Fluid Capacity | 20.1gal | 76L |
| Max Speed | 11.1mph | 17.9km/h |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Dump Height | 8070.9ft in | 2460m |
|---|---|---|
| Breakout Force (Iso 14397) | 4200lb | 1905.1kg |
| Tipping Load (Iso 14397) | 4380lb | 1986.8kg |
| Operating Load Rating | 2350lb | 1066kg |
| Boom Breakout Force | 3200lb | 14.3kN |
| Dump Angle @ Max. Height | 43degrees | |
| Width Without Bucket | 5.8ft in | 1.8m |
04 Hydraulic Specification
| Pump Flow Capacity | 28.1gal/min | 106L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 4994lb ft | 6771Nm |
|---|---|---|
| Tractive Effort | 7491lb ft | 10156.5Nm |
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 38hp | 28.4kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 53hp | 39.6kw |
| System Pressure At Couplers | 3250psi | 22408kPa |
07 Dimensions Dimensions
| Length With Bucket | 11.39ft in | 3470mm |
|---|---|---|
| Ground Clearance | 8.67in | 220mm |
| Wheelbase | 3.71ft in | 1130mm |
| Length W/O Bucket | 9.36ft in | 2850mm |
| Reach At Max Lift And Dump | 36.23in | 920mm |
| Angle Of Departure | 28degrees | |
| Hinge Pin Height, Maximum Height | 121.66in | 3090mm |
| Turning Radius - Tts870 | 6.67ft in | 2030mm |
| Height To Top Of Rops | 79.53in | 2020mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.