Specification sheet Skid Steer Loader Ref john-deere-320d-skid-steer-loader
John Deere 320D
The John Deere 320D is a skid steer loader with an operating weight of 6,605.05 lb (2,996 kg), a 63.17 hp engine, and a rated operating capacity of 2,151.72 lb (976 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,605.05lb
2,996kg
Engine power
63.17hp
47.1kW
Net Power Rated operating capacity
2,151.72lb
976kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 320D sits in the middle of its class:
- Operating weight 6,610 lb lighter than 54% (n=334)
- Engine power 63 hp more powerful than 51% (n=335)
- Rated operating capacity 2,150 lb higher-rated than 64% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA Interim Tier 4/EU Stage IIIB | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Make | John Deere PowerTech | |
| Engine Model | E 4024HT | |
| Gross Power | 68.2hp | 50.8kw |
| Air Cleaner | Dry dual element | |
| Net Power | 63.2hp | 47.1kw |
| Net Torque | 169.7lb ft | 230Nm |
| Power Measured @ | 2300rpm | |
| Torque Measured @ | 2000rpm | |
| Net Torque Rise | 27% | |
| Aspiration | Turbocharged and intercooled | |
| Displacement | 149cu in | 2.5L |
02 Operational Specification
| Operational Weight | 6605.1lb | 2996kg |
|---|---|---|
| Max Speed | 11mph | 17.8km/h |
| Hydraulic System Fluid Capacity | 20.1gal | 76L |
| Tire Size | 12 x 16.5 10 PR SKS | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Dump Height | 8ft in | 2.5m |
|---|---|---|
| Tipping Load (Iso 14397) | 4003.6lb | 1816kg |
| Operating Load Rating | 2151.8lb | 976kg |
| Boom Breakout Force | 3500lb | 15.6kN |
| Width Without Bucket | 5.8ft in | 1.8m |
04 Hydraulic Specification
| Pump Flow Capacity | 31gal/min | 117L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 4725lb ft | 6406.3Nm |
|---|---|---|
| Tractive Effort | 7100lb ft | 9626.4Nm |
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 38hp | 28.4kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 46hp | 34.4kw |
| System Pressure At Couplers | 3100psi | 21373.8kPa |
07 Dimensions Dimensions
| Ground Clearance | 10in | 254mm |
|---|---|---|
| Wheelbase | 3.52ft in | 1070mm |
| Length W/O Bucket | 8.99ft in | 2740mm |
| Reach At Max Lift And Dump | 28.67in | 728mm |
| Length | 132.29in | 336cm |
| Angle Of Departure | 27.5degrees | |
| Hinge Pin Height, Maximum Height | 118.9in | 3020mm |
| Turning Radius - Tts870 | 6.6ft in | 2010mm |
| Height To Top Of Rops | 79.14in | 2010mm |
| Overall Width Without Bucket | 69.3in | 1760mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.