Specification sheet Compact Track Loader Ref john-deere-319d-multi-terrain-loader
John Deere 319D
The John Deere 319D is a compact track loader with an operating weight of 8,558.35 lb (3,882 kg), a 63.17 hp engine, a rated operating capacity of 1,902.59 lb (863 kg), and a tipping load of 5,604.2 lb (2,542 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,558.35lb
3,882kg
Engine power
63.17hp
47.1kW
Net Power Rated operating capacity
1,902.59lb
863kg
Tipping load
5,604.2lb
2,542kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere 319D sits below the median for its class:
- Operating weight 8,560 lb lighter than 64% (n=182)
- Engine power 63 hp less powerful than 74% (n=167)
- Rated operating capacity 1,900 lb lower-rated than 78% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | John Deere | |
| Engine Model | E 4024HT | |
| Gross Power | 68.2hp | 50.8kw |
| Net Power | 63.2hp | 47.1kw |
| Power Measured @ | 2300rpm | |
| Peak Torque | 169.7lb ft | 230Nm |
| Torque Measured @ | 2000rpm | |
| Displacement | 146.5cu in | 2.4L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 8558.4lb | 3882kg |
|---|---|---|
| Fuel Capacity | 18.5gal | 70L |
| Max Speed | 6.1mph | 9.8km/h |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Tipping Load | 5604.2lb | 2542kg |
|---|---|---|
| Operating Load | 1902.6lb | 863kg |
| Boom Breakout Force | 1589lb | 7.1kN |
| Bucket Breakout Force | 5125lb | 22.8kN |
04 Hydraulic Specification
| Pump Flow | 15.6gal/min | 59L/min |
|---|---|---|
| Relief Valve Pressure | 3100.1psi | 21374kPa |
| Hydraulic Horsepower-Standard Flow | 30.1hp | 22.4kw |
05 Dimensions Dimensions
| Ground Clearance | 9.85in | 250mm |
|---|---|---|
| Dump Height - Maximum | 94.49in | 2400mm |
| Dump Reach | 28.39in | 721mm |
| Turning Radius | 6.6ft in | 2010mm |
| Length With Out Bucket | 8.99ft in | 2740mm |
| Overall Length | 11.03ft in | 3360mm |
| Dump Angle | 42degrees | |
| Height To Top Of Rops | 78.75in | 2000mm |
| Hinge Pin Height, Maximum Height | 118.12in | 3000mm |
06 Undercarriage Dimensions
| Ground Pressure | 5.4psi | 37.21kPa |
|---|---|---|
| Track Width - Standard | 12.6in | 320mm |
| Number Of Track Rollers Per Side | 4 |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.