John Deere 318G Skid Steer _JD
The John Deere 318G Skid Steer _JD is a skid steer loader with an operating weight of 6,481.6 lb (2,940 kg), and a rated operating capacity of 1,946.7 lb (883 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 318G Skid Steer _JD sits in the middle of its class:
- Operating weight 6,480 lb lighter than 58% (n=334)
- Rated operating capacity 1,950 lb higher-rated than 50% (n=288)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Driveline Specification
| Engine Model | 4TNV86CHT | |
|---|---|---|
| Displacement | 128.2cu in | 2.1L |
| Engine Manufacturer | Yanmar | |
| Emission Rating | Tier 4 | |
| Rated Engine Speed | 2600rpm | |
| Sae Net Power | 61hp | 45.5kw |
| Sae Gross Power | 65hp | 48.5kw |
| Max. Gross Torque | 207 (153) | |
| Drive Chain Rating [Ansi] | 80 - HD | |
| Tire Size - Standard | 10 x 16.5 | |
| Aspiration | Turbo |
02 Capacities Specification
| Fuel Tank - Diesel | 18.8gal | 71L |
|---|
03 Description Specification
| Lift Geometry | Vertical |
|---|
04 Performance Specification
| Rated Operating Capacity - Optional Counterweight | 2096.6lb | 951kg |
|---|---|---|
| Tipping Capacity (Sae) | 3893.4lb | 1766kg |
| Axle Torque - Maximum | 6459 (4764) | |
| Speed - Maximum | 6.9mph | 11.2km/h |
| Breakout - Lift | 4990.8lb | 22.2kN |
| Breakout - Bucket | 5980lb | 26.6kN |
| Hydraulic Power | 31hp | 23.2kw |
| Pump Output | 15.6gal/min | 59L/min |
| System Pressure | 3450psi | 23786.9kPa |
| Speed - Maximum Option | 10.1mph | 16.3km/h |
| Rated Operating Capacity | 1946.7lb | 883kg |
05 Weights Specification
| Operating Weight | 6481.6lb | 2940kg |
|---|
06 Dimensions Dimensions
| Length With Bucket | 10.63ft in | 3240mm |
|---|---|---|
| Ground Clearance | 7.09in | 180mm |
| Wheelbase | 3.45ft in | 1050mm |
| Length - No Bucket | 103.55in | 2630mm |
| Length - With Bucket | 127.56in | 3240mm |
| Overall Height | 6.44ft in | 1960mm |
| Rear Departure Angle | 22.3 | |
| Reach - Max Dump Height | 33.86in | 860mm |
| Rollback - Ground Level | 30- | 30degrees |
| Dump Angle | 42 | |
| Width - No Bucket | 63in | 1600mm |
| Dump Height - Maximum | 94.49in | 2400mm |
| Height To Hinge Pin | 120.08in | 3050mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.