Specification sheet Skid Steer Loader Ref john-deere-318d-skid-steer-loader
John Deere 318D
The John Deere 318D is a skid steer loader with an operating weight of 6,450 lb (2,925.68 kg), a 58 hp engine, and a rated operating capacity of 1,950 lb (884.51 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,450lb
2,925.68kg
Engine power
58hp
43.26kW
Net Power Rated operating capacity
1,950lb
884.51kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 318D sits in the middle of its class:
- Operating weight 6,450 lb lighter than 59% (n=334)
- Engine power 58 hp less powerful than 58% (n=335)
- Rated operating capacity 1,950 lb higher-rated than 51% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA Interim Tier 4/EU Stage IIIB | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Make | John Deere PowerTech | |
| Engine Model | E 4024HT | |
| Gross Power | 63hp | 47kw |
| Air Cleaner | Dry dual element | |
| Net Power | 58hp | 43.3kw |
| Net Torque | 161.6lb ft | 219Nm |
| Power Measured @ | 2300rpm | |
| Torque Measured @ | 1950rpm | |
| Aspiration | Turbocharged and intercooled | |
| Net Torque Rise | 31% | |
| Displacement | 146.5cu in | 2.4L |
02 Operational Specification
| Operational Weight | 6450lb | 2925.7kg |
|---|---|---|
| Fuel Capacity | 18.5gal | 70L |
| Hydraulic System Fluid Capacity | 18gal | 68L |
| Max Speed | 10.1mph | 16.3km/h |
| Tire Size | 10 x 16.5 8 PR Extra Wal | |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 70amps |
03 Loader Specification
| Rollback - Ground Level | 32degrees | |
|---|---|---|
| Dump Height | 7.9ft in | 2.4m |
| Tipping Load (Iso 14397) | 3600lb | 1633kg |
| Bucket Breakout Force (Iso 14397) | 5125lb | 2324.7kg |
| Operating Load Rating | 1950lb | 884.6kg |
| Dump Angle @ Max. Height | 42degrees | |
| Width Without Bucket | 5.3ft in | 1.7m |
04 Hydraulic Specification
| Pump Flow Capacity | 27gal/min | 102L/min |
|---|
05 Axles Specification
| Maximum Axle Torque | 4450lb ft | 6033.4Nm |
|---|---|---|
| Tractive Effort | 7315lb ft | 9917.9Nm |
06 Hydraulic Specification
| Hydraulic Horsepower-Standard Flow | 34hp | 25.4kw |
|---|---|---|
| Hydraulic Horsepower_High Flow | 54hp | 40.3kw |
| System Pressure At Couplers | 3100psi | 21373.8kPa |
07 Dimensions Dimensions
| Ground Clearance | 8.55in | 217mm |
|---|---|---|
| Wheelbase | 3.52ft in | 1070mm |
| Length W/O Bucket | 8.99ft in | 2740mm |
| Reach At Max Lift And Dump | 29.93in | 760mm |
| Turning Radius - Tts870 | 6.5ft in | 1980mm |
| Length | 132.29in | 336cm |
| Height To Top Of Rops | 77.96in | 1980mm |
| Hinge Pin Height, Maximum Height | 117.72in | 2990mm |
| Angle Of Departure | 25degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.