John Deere 317G
The John Deere 317G is a compact track loader with an operating weight of 8,203.5 lb (3,721 kg), a rated operating capacity of 2,127.5 lb (965 kg), and a tipping load of 6,076 lb (2,756 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the John Deere 317G sits below the median for its class:
- Operating weight 8,200 lb lighter than 66% (n=182)
- Rated operating capacity 2,130 lb lower-rated than 68% (n=156)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Driveline Specification
| Engine Model | 4TNV86CHT | |
|---|---|---|
| Displacement | 128.2cu in | 2.1L |
| Engine Manufacturer | Yanmar | |
| Emission Rating | Tier 4 | |
| Rated Speed | 2600rpm | |
| Engine Output - Net | 61.2hp | 45.6kw |
| Engine Output - Gross | 65.1hp | 48.5kw |
| Track Shoe Width | 12.6in | 320mm |
| Aspiration | Turbo | |
| Torque | 152.7lb ft | 207Nm |
02 Capacities Specification
| Fuel Tank - Diesel | 18.8gal | 71L |
|---|
03 Description Specification
| Lift Geometry | Vertical |
|---|
04 Performance Specification
| Ground Bearing Pressure | 5.6psi | 38kPa |
|---|---|---|
| Pump Flow | 15.6gal/min | 59L/min |
| Speed - Maximum | 7.1mph | 11.3km/h |
| Breakout - Lift | 4990.8lb | 22.2kN |
| Breakout - Bucket | 5980lb | 26.6kN |
| Hydraulic Power | 31.1hp | 23.2kw |
| System Pressure | 3450psi | 23786.9kPa |
| Tipping Load | 6076lb | 2756kg |
| Rated Operating Capacity | 2127.5lb | 965kg |
05 Weights Specification
| Operating Weight | 8203.5lb | 3721kg |
|---|
06 Dimensions Dimensions
| Height To Top Of Cab | 6.53ft in | 1990mm |
|---|---|---|
| Ground Clearance | 8.27in | 210mm |
| Track Gauge | 4.37ft in | 1330mm |
| Length - No Bucket | 103.55in | 2630mm |
| Length - With Bucket | 127.56in | 3240mm |
| Rear Departure Angle | 32.3 | |
| Rollback - Ground Level | 30- | 30degrees |
| Dump Angle | 42 | |
| Width - No Bucket | 64.97in | 1650mm |
| Dump Height - Maximum | 95.67in | 2430mm |
| Height To Hinge Pin | 120.87in | 3070mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.