Specification sheet Skid Steer Loader Ref john-deere-313-skid-steer-loader

John Deere 313

The John Deere 313 is a skid steer loader with an operating weight of 5,150 lb (2,336.01 kg), a 45 hp engine, a rated operating capacity of 1,261.05 lb (572 kg), and a tipping load of 2,526.5 lb (1,146 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
5,150lb
2,336.01kg
Engine power
45hp
33.56kW
Net Power
Rated operating capacity
1,261.05lb
572kg
Tipping load
2,526.5lb † — value reconstructed from related published figures
1,146kg
Bucket capacity
0.6yd³
0.4m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the John Deere 313 sits below the median for its class:

  • Operating weight 5,150 lb lighter than 85% (n=334)
  • Engine power 45 hp less powerful than 84% (n=335)
  • Rated operating capacity 1,260 lb lower-rated than 89% (n=288)

◇Scale drawingdrawn to scale · mm

1960C193D3140A2440B
Side elevation
1960C1500E
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2240
Engine Model 4024T
Gross Power 49hp 36.6kw
Net Power 45hp 33.6kw
Power Measured @ 2400rpm
Aspiration Turbocharged
Displacement 149cu in 2.5L

02 Operational Specification

Operational Weight 5150lb 2336.1kg
Fuel Capacity 17.5gal 66L
Cooling System Fluid Capacity 1.7gal 6.2L
Engine Oil Fluid Capacity 2.4gal 9L
Max Speed 6.8mph 11km/h
Hydraulic System Fluid Capacity 5.1gal 19L
Chain Box Fluid Capacity - Each Side 4gal 14.8L
Tire Size 10x16.5 8 PR
Operating Voltage 12V
Alternator Supplied Amperage 70amps

03 Loader Specification

Breakout Force 3302.6lb 1498kg
Operating Load Rating 1261.1lb 572kg
Bucket Capacity 0.6yd3 0.4m3

04 Hydraulic Specification

Pump Flow Capacity 15.1gal/min 57L/min
Relief Valve Pressure 3450psi 23786.9kPa

05 Dimensions Dimensions

Length With Bucket 10.31ft in 3140mm
Width Over Tires 4.93ft in 1500mm
Ground Clearance 7.6in 193mm
Height To Top Of Cab 6.44ft in 1960mm
Wheelbase 3.12ft in 950mm
Length W/O Bucket 8.01ft in 2440mm
Clearance At Max Lift And Dump 6.99ft in 2130mm
Reach At Max Lift And Dump 17.41in 442mm
Turning Radius From Center - Inc Bucket 74.41in 1890mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.