John Deere 312 GR _ Skid Steer _JD
The John Deere 312 GR _ Skid Steer _JD is a skid steer loader with an operating weight of 6,001 lb (2,722 kg), and a rated operating capacity of 1,552.1 lb (704 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the John Deere 312 GR _ Skid Steer _JD sits below the median for its class:
- Operating weight 6,000 lb lighter than 69% (n=334)
- Rated operating capacity 1,550 lb lower-rated than 68% (n=288)
Not positioned on engine power — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Driveline Specification
| Engine Model | 4TNV86CT | |
|---|---|---|
| Displacement | 128.2cu in | 2.1L |
| Engine Manufacturer | Yanmar | |
| Emission Rating | Tier 4 | |
| Rated Engine Speed | 2600rpm | |
| Sae Net Power | 48hp | 35.8kw |
| Sae Gross Power | 51hp | 38.1kw |
| Max. Gross Torque | 168 (124) | |
| Drive Chain Rating [Ansi] | 80 - HD | |
| Tire Size - Standard | 10 x 16.5 | |
| Aspiration | Turbo |
02 Capacities Specification
| Fuel Tank - Diesel | 18.8gal | 71L |
|---|
03 Description Specification
| Lift Geometry | Radial |
|---|
04 Performance Specification
| Rated Operating Capacity - Optional Counterweight | 1702lb | 772kg |
|---|---|---|
| Tipping Capacity (Sae) | 3102lb | 1407kg |
| Axle Torque - Maximum | 4664 (3440) | |
| Speed - Maximum | 6.8mph | 10.8km/h |
| Breakout - Lift | 4496.2lb | 20kN |
| Breakout - Bucket | 4990.8lb | 22.2kN |
| Hydraulic Power | 29.2hp | 21.8kw |
| Pump Output | 15.6gal/min | 59L/min |
| System Pressure | 3250psi | 22408kPa |
| Rated Operating Capacity | 1552.1lb | 704kg |
05 Weights Specification
| Operating Weight | 6001lb | 2722kg |
|---|
06 Dimensions Dimensions
| Length With Bucket | 10.63ft in | 3240mm |
|---|---|---|
| Ground Clearance | 7.09in | 180mm |
| Wheelbase | 3.45ft in | 1050mm |
| Length - No Bucket | 103.55in | 2630mm |
| Overall Height | 6.44ft in | 1960mm |
| Rear Departure Angle | 22.3 | |
| Reach - Max Dump Height | 15.75in | 400mm |
| Rollback - Ground Level | 30- | 30degrees |
| Dump Angle | 45 | |
| Width - No Bucket | 63in | 1600mm |
| Dump Height - Maximum | 88.59in | 2250mm |
| Height To Hinge Pin | 114.97in | 2920mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.