Specification sheet Wheel Loader Ref john-deere-304j-wheel-loader

John Deere 304J

The John Deere 304J is a wheel loader with an operating weight of 13,404 lb (6,080 kg), a 73 hp engine, and a 1.4 yd³ (1.11 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
13,404lb
6,080kg
Engine power
73hp
54kW
Net Power
Bucket capacity
1.4yd³
1.11m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the John Deere 304J sits in the middle of its class:

  • Operating weight 13,400 lb heavier than 59% (n=374)
  • Engine power 73 hp more powerful than 51% (n=367)
  • Bucket capacity 1.4 yd³ larger-bucket than 51% (n=309)

Scale drawingdrawn to scale · mm

2802B390C6139A
Side elevation
2802B750D
Front elevation

01 Engine Specification

Number Of Cylinders 5
Engine Make 2240
Engine Model 5030T
Net Power 73hp 54kw
Power Measured @ 2800rpm
Max Torque 195lb ft 264Nm
Displacement 186cu in 3.1L
Torque Measured @ 1500rpm
Aspiration Turbocharged
Torque Rise 42.4%

02 Operational Specification

Operating Weight 13404lb 6080kg
Fuel Capacity 22gal 81L
Hydraulic System Fluid Capacity 21.1gal 80L
Engine Oil Fluid Capacity 3gal 11.2L
Cooling System Fluid Capacity 3.2gal 12L
Front Axle/Diff Fluid Capacity 2gal 7.3L
Rear Axle/Diff Fluid Capacity 1.8gal 6.7L
Static Tipping Weight 10241lb 4645kg
Turning Radius 12.4ft in 3777mm
Operating Voltage 12V
Alternator Supplied Amperage 65amps
Rear Axle Oscillation 20degrees
Tire Size 405/ 70R20

03 Transmission Specification

Transmission Type Hydraulic
Number Of Forward Gears 2
Number Of Reverse Gears 2
Max Speed - Forward 18.6mph 30km/h
Max Speed - Reverse 18.6mph 30km/h

04 Hydraulic System Specification

Relief Valve Setting 2750psi 19000kPa
Pump Flow Capacity 25gal/min 93.7L/min
Raise Time 5.3sec
Dump Time 1.6sec
Lower Time 4.5sec
Pump Type Gear

05 Bucket Dimensions

Dump Clearance At Max Raise 11.08ft in 3365mm
Bucket Capacity - Heaped 1.4yd3 1.11m3
Bucket Width — value corrected — the source published it under the wrong unit 7.22ft in 2200mm
Breakout Force 12364lb 55kN

06 Dimensions Dimensions

Ground Clearance — value corrected — the source published it under the wrong unit 1.28ft in 390mm
Length With Bucket On Ground 20.08ft in 6139mm
Width Over Tires — value corrected — the source published it under the wrong unit 2.46ft in 750mm
Height To Top Of Cab 9.17ft in 2802mm
Wheelbase 7.5ft in 2300mm
Hinge Pin - Max Height 11.08ft in 3370mm

Data notes

Corrected value. The source published these figures under the wrong unit. The metric figure is authoritative and the imperial value shown here is derived from it.

  • Bucket Width: shown as 7.22 ft in (source stated a value inconsistent with its own metric figure of 2200 mm)
  • Ground Clearance: shown as 1.28 ft in (source stated a value inconsistent with its own metric figure of 390 mm)
  • Width Over Tires: shown as 2.46 ft in (source stated a value inconsistent with its own metric figure of 750 mm)

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.