Specification sheet Wheel Loader Ref john-deere-304h-waste-handler-wheel-loader
John Deere 304H Waste Handler
The John Deere 304H Waste Handler is a wheel loader with an operating weight of 13,880 lb (6,296 kg), a 65 hp engine, and a 1 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,880lb
6,296kg
Engine power
65hp
48kW
Net Power Bucket capacity
1yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 304H Waste Handler sits above the median for its class:
- Operating weight 13,880 lb heavier than 61% (n=374)
- Engine power 65 hp less powerful than 58% (n=367)
- Bucket capacity 1 yd³ smaller-bucket than 79% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNE98 | |
| Net Power | 65hp | 48kw |
| Gross Power | 69hp | 51kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 173lb ft | 235Nm |
| Displacement | 202cu in | 3.3L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Natural |
02 Operational Specification
| Operating Weight | 13880lb | 6296kg |
|---|---|---|
| Fuel Capacity | 18.5gal | 70L |
| Hydraulic System Fluid Capacity | 11.9gal | 45L |
| Engine Oil Fluid Capacity | 2.5gal | 9.4L |
| Cooling System Fluid Capacity | 3.3gal | 12.2L |
| Front Axle/Diff Fluid Capacity | 1.6gal | 5.7L |
| Rear Axle/Diff Fluid Capacity | 1.3gal | 4.7L |
| Static Tipping Weight | 8986lb | 4076kg |
| Turning Radius | 10.7ft in | 3260mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 40x 14-16 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 18.6mph | 30km/h |
| Max Speed - Reverse | 18.6mph | 30km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21000kPa |
|---|---|---|
| Pump Flow Capacity | 22gal/min | 82.5L/min |
| Raise Time | 4.5sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.8sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.95ft in | 2421mm |
|---|---|---|
| Bucket Capacity - Heaped | 1yd3 | 0.8m3 |
| Bucket Capacity - Struck | 0.8yd3 | 0.6m3 |
| Bucket Width | 6.63ft in | 2019mm |
| Breakout Force | 10410lb | 4722kN |
06 Dimensions Dimensions
| Ground Clearance | 0.99ft in | 300mm |
|---|---|---|
| Length With Bucket On Ground | 17.84ft in | 5436mm |
| Width Over Tires | 6.5ft in | 1980mm |
| Height To Top Of Cab | 8.92ft in | 2718mm |
| Wheelbase | 7.06ft in | 2150mm |
| Hinge Pin - Max Height | 10.34ft in | 3150mm |
| Reach At Max Lift And Dump | 3.04ft in | 925mm |
?Questions & answersfrom this machine's data
- How much does a John Deere 304H Waste Handler wheel loader weigh?
- A John Deere 304H Waste Handler wheel loader has an operating weight of 13,880 lb (6,296 kg).
- What engine does a John Deere 304H Waste Handler wheel loader have?
- A John Deere 304H Waste Handler wheel loader is powered by a 4TNE98 engine producing 65 hp (48 kW).
- What size bucket does a John Deere 304H Waste Handler wheel loader have?
- A John Deere 304H Waste Handler wheel loader has a bucket capacity of 1 yd³ (0.8 m³).
- How much fuel does a John Deere 304H Waste Handler wheel loader hold?
- A John Deere 304H Waste Handler wheel loader has a fuel capacity of 18.5 gal (70 L).
- What is the ground clearance of a John Deere 304H Waste Handler wheel loader?
- A John Deere 304H Waste Handler wheel loader has a ground clearance of 1 ft (300 mm).
- How long is a John Deere 304H Waste Handler wheel loader?
- A John Deere 304H Waste Handler wheel loader has an overall length of 17.8 ft (5,436 mm) with the bucket on the ground.
- How fast does a John Deere 304H Waste Handler wheel loader travel?
- A John Deere 304H Waste Handler wheel loader has a maximum forward travel speed of 18.6 mph (30 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.