John Deere 30
The John Deere 30 is a mini excavator with an operating weight of 6,300 lb, a 24 hp engine, and a dig depth of 8.7 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the John Deere 30 sits in the middle of its class:
- Operating weight 6,300 lb lighter than 53% (n=438)
- Engine power 24 hp more powerful than 52% (n=448)
- Dig depth 8.7 ft shallower-digging than 54% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 15.26ft in | 4,651mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 7.85ft in | 2,393mm‖ — metric converted from the published imperial value |
| Max Loading Height | 9.29ft in | 2,832mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 14.9ft in | 4,542mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 8.7ft in | 2,652mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.06ft in | 1,542mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.99ft in | 302mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.85ft in | 2,393mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.47ft in | 1,362mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 13in | 330mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 3.94ft in | 1,201mm‖ — metric converted from the published imperial value |
| Number Of Carrier Rollers Per Side | 4 | |
| Ground Pressure | 4.05psi | 27.9kpa‖ — metric converted from the published imperial value |
| Number Of Shoes Per Side | 40 | |
| Number Of Track Rollers Per Side | 1 | |
| Max Travel Speed | 1.24mph | 2km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TN82-RJB | |
| Net Power | 24hp | 18kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2350rpm | |
| Displacement | 83cu in | 1,360cm3‖ — metric converted from the published imperial value |
| Max Torque | 65lb ft | |
| Torque Measured @ | 1600rpm |
05 Operational Specification
| Operating Weight | 6300lb | 2,858kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 11.4gal | 43.2l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1.5gal | 5.7l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 22.5gal | 85.2l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.1gal | 4.2l‖ — metric converted from the published imperial value |
| Swing Drive Fluid Capacity | 0.7gal | 3l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 2130psi | 14,686kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 9gal/min | 34l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.