John Deere 27D
The John Deere 27D is a mini excavator with an operating weight of 6,393.5 lb, a 26.4 hp engine, and a dig depth of 8.58 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the John Deere 27D sits in the middle of its class:
- Operating weight 6,390 lb lighter than 52% (n=438)
- Engine power 26 hp more powerful than 58% (n=448)
- Dig depth 8.6 ft shallower-digging than 56% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 13.78ft in | 4,200mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 14.64ft in | 4,462mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.08ft in | 2,463mm‖ — metric converted from the published imperial value |
| Max Loading Height | 10.5ft in | 3,200mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 8.58ft in | 2,615mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Arm 3ft. 10in. 1170mm |
02 Dimensions Specification
| Width To Outside Of Tracks | 5.08ft in | 1,548mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 4.92ft in | 1,500mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1ft in | 305mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.08ft in | 2,463mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 2.55ft in | 777mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.83ft in | 558mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 12in | 305mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 3.9psi | 27kpa‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.8mph | 4.5km/h‖ — metric converted from the published imperial value |
04 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 3TNV88 | |
| Net Power | 26.4hp | 19.7kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 100cu in | 1,639cm3‖ — metric converted from the published imperial value |
| Aspiration | Natural |
05 Operational Specification
| Operating Weight | 6393.5lb | 2,900kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 10.5gal | 39.7l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 9.2gal | 35l‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 16.4gal/min | 62.1l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 9.1rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.