Specification sheet Mini Excavator Ref john-deere-26g-mini-excavator

John Deere 26G

The John Deere 26G is a mini excavator with an operating weight of 6,106.9 lb.

✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →
Operating weight
6,106.9lb
 

◆Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the John Deere 26G sits in the middle of its class:

  • Operating weight 6,110 lb lighter than 57% (n=438)

Not positioned on engine power, dig depth — withheld or unpublished for this machine.

01 Dimensions Specification

Ground Clearance 0.99ft in 302mm‖ — metric converted from the published imperial value
Tail Swing Radius 2.63ft in 802mm‖ — metric converted from the published imperial value
Track Gauge 3.94ft in 1,201mm‖ — metric converted from the published imperial value
Dozer Blade Height 12.6in 320mm‖ — metric converted from the published imperial value
Dozer Blade Width 59.06in 1,500mm‖ — metric converted from the published imperial value
Dump Height - Mono Boom 9.98ft in 3,042mm‖ — metric converted from the published imperial value
Overall Width 4.93ft in 1,503mm‖ — metric converted from the published imperial value
Standard Dipper 3.84ft in 1,170mm‖ — metric converted from the published imperial value
Track Length On Ground 5ft in 1,524mm‖ — metric converted from the published imperial value
Transport Height 7.98ft in 2,432mm‖ — metric converted from the published imperial value
Transport Length Mono Boom 13.72ft in 4,182mm‖ — metric converted from the published imperial value
Undercarriage Overall Length 6.44ft in 1,963mm‖ — metric converted from the published imperial value
Dig Depth - Mono Boom 8.5ft in 2,591mm‖ — metric converted from the published imperial value
Width Over Standard Tracks 4.93ft in 1,503mm‖ — metric converted from the published imperial value
Dig Height - Mono Boom 14.05ft in 4,282mm‖ — metric converted from the published imperial value
Digging Reach - Mono Boom 15.2ft in 4,633mm‖ — metric converted from the published imperial value

02 Driveline Specification

Displacement 77.4cu in 1,268cm3‖ — metric converted from the published imperial value
Engine Manufacturer Yanmar
Engine Output 20hp 15kw‖ — metric converted from the published imperial value
Emission Rating Tier 4
Rated Speed 2500rpm
Track Shoe Width 11.9in 302mm‖ — metric converted from the published imperial value
Number Of Cylinders 3

03 Capacities Specification

Fuel Tank - Diesel 9.1gal 34l‖ — metric converted from the published imperial value
Hydraulic Tank 6.4gal 24l‖ — metric converted from the published imperial value
System Voltage 12V
Number Of Batteries 1

04 Performance Specification

Travel Speed 2.8mph 4.5km/h‖ — metric converted from the published imperial value
Slew Speed 9.1rpm
Ground Bearing Pressure 3.8psi 26kpa‖ — metric converted from the published imperial value
Breakout - Bucket 4993.1lb 2,264.8kg‖ — metric converted from the published imperial value
Dipper Tearout 3529.6lb 1,601kg‖ — metric converted from the published imperial value
Main Pumps - Maximum Flow 19.1gal/min 72.3l/min‖ — metric converted from the published imperial value

05 Weights Specification

Operating Weight 6106.9lb 2,770kg‖ — metric converted from the published imperial value

Data notes

‖

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.