Specification sheet Wheel Loader Ref john-deere-244h-wheel-loader
John Deere 244H
The John Deere 244H is a wheel loader with an operating weight of 11,370 lb (5,157 kg), a 55 hp engine, and a 1 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,370lb
5,157kg
Engine power
55hp
41kW
Net Power Bucket capacity
1yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 244H sits in the middle of its class:
- Operating weight 11,370 lb lighter than 58% (n=374)
- Engine power 55 hp less powerful than 74% (n=367)
- Bucket capacity 1 yd³ smaller-bucket than 79% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNE98 | |
| Net Power | 55hp | 41kw |
| Gross Power | 58hp | 43kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 166lb ft | 225Nm |
| Displacement | 202cu in | 3.4L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Natural |
02 Operational Specification
| Operating Weight | 11370lb | 5157kg |
|---|---|---|
| Fuel Capacity | 18.5gal | 70L |
| Hydraulic System Fluid Capacity | 19.3gal | 73L |
| Engine Oil Fluid Capacity | 3.1gal | 11.5L |
| Cooling System Fluid Capacity | 2.9gal | 10.9L |
| Transmission Fluid Capacity | 2.7gal | 10L |
| Front Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Rear Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Static Tipping Weight | 7474lb | 3390.2kg |
| Turning Radius | 12.5ft in | 3790mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 35amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 17.5/65-20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 20.1mph | 32.2km/h |
| Max Speed - Reverse | 20.1mph | 32.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | 20615kPa |
|---|---|---|
| Pump Flow Capacity | 21.2gal/min | 80L/min |
| Raise Time | 4.3sec | |
| Dump Time | 0.8sec | |
| Lower Time | 3.8sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.39ft in | 2555mm |
|---|---|---|
| Bucket Capacity - Heaped | 1yd3 | 0.8m3 |
| Bucket Capacity - Struck | 0.9yd3 | 0.7m3 |
| Bucket Width | 6.53ft in | 1990mm |
| Breakout Force | 10143lb | 45.1kN |
06 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 16.25ft in | 4950mm |
| Width Over Tires | 6.34ft in | 1930mm |
| Height To Top Of Cab | 9.83ft in | 2995mm |
| Wheelbase | 7.22ft in | 2200mm |
| Hinge Pin - Max Height | 10.37ft in | 3160mm |
| Reach At Max Lift And Dump | 2.78ft in | 845mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.