Specification sheet Wheel Loader Ref john-deere-244e-wheel-loader
John Deere 244E
The John Deere 244E is a wheel loader with an operating weight of 11,746 lb (5,327.9 kg), a 55 hp engine, and a 1 yd³ (0.77 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,746lb
5,327.9kg
Engine power
55hp
41.1kW
Net Power Bucket capacity
1yd³
0.77m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 244E sits in the middle of its class:
- Operating weight 11,750 lb lighter than 56% (n=374)
- Engine power 55 hp less powerful than 74% (n=367)
- Bucket capacity 1 yd³ smaller-bucket than 79% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TN100 | |
| Net Power | 55hp | 41.1kw |
| Gross Power | 59hp | 44kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 182lb ft | 246.8Nm |
| Displacement | 211cu in | 3.5L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Natural | |
| Torque Rise | 39% |
02 Operational Specification
| Operating Weight | 11746lb | 5327.9kg |
|---|---|---|
| Fuel Capacity | 18.5gal | 70.1L |
| Hydraulic System Fluid Capacity | 15.9gal | 60.2L |
| Engine Oil Fluid Capacity | 3.4gal | 12.7L |
| Cooling System Fluid Capacity | 3.5gal | 13.2L |
| Transmission Fluid Capacity | 2.7gal | 10L |
| Front Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Rear Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Static Tipping Weight | 8928.8lb | 4050kg |
| Turning Radius | 12.5ft in | 3785.7mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 25amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 17.5/65-20 |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 20mph | 32.2km/h |
| Max Speed - Reverse | 20mph | 32.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | 20615.4kPa |
|---|---|---|
| Pump Flow Capacity | 20.6gal/min | 78L/min |
| Raise Time | 4.7sec | |
| Dump Time | 0.9sec | |
| Lower Time | 3.8sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.39ft in | 2555mm |
|---|---|---|
| Bucket Capacity - Heaped | 1yd3 | 0.77m3 |
| Bucket Capacity - Struck | 0.9yd3 | 0.69m3 |
| Bucket Width | 6.56ft in | 1999mm |
| Breakout Force | 10143lb | 45.12kN |
06 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 16.25ft in | 4950mm |
| Width Over Tires | 6.34ft in | 1930mm |
| Height To Top Of Cab | 9.63ft in | 2935mm |
| Wheelbase | 7.22ft in | 2200mm |
| Hinge Pin - Max Height | 10.37ft in | 3160mm |
| Reach At Max Lift And Dump | 2.78ft in | 845mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.