Specification sheet Wheel Loader Ref john-deere-210le-wheel-loader
John Deere 210LE
The John Deere 210LE is a wheel loader with an operating weight of 9,129.35 lb (4,141 kg), a 73 hp engine, and a 1 yd³ (0.77 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,129.35lb
4,141kg
Engine power
73hp
54.5kW
Net Power Bucket capacity
1yd³
0.77m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 210LE sits below the median for its class:
- Operating weight 9,130 lb lighter than 82% (n=374)
- Engine power 73 hp more powerful than 51% (n=367)
- Bucket capacity 1 yd³ smaller-bucket than 79% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 4045D | |
| Net Power | 73hp | 54.5kw |
| Gross Power | 78hp | 58.2kw |
| Max Torque | 220lb ft | 298.3Nm |
| Displacement | 276cu in | 4.6L |
| Aspiration | Natural | |
| Torque Rise | 26% |
02 Operational Specification
| Operating Weight | 9129.4lb | 4141kg |
|---|---|---|
| Fuel Capacity | 25.9gal | 98L |
| Hydraulic System Fluid Capacity | 14.4gal | 54.5L |
| Engine Oil Fluid Capacity | 2.3gal | 8.5L |
| Cooling System Fluid Capacity | 4.3gal | 16L |
| Rear Axle/Diff Fluid Capacity | 3.5gal | 13L |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | Front 12-16.5 8PR NHS Rear 16.9-24 8PR R4 |
03 Transmission Specification
| Transmission Type | synchronized | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.5mph | 33km/h |
| Max Speed - Reverse | 20.5mph | 33km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2750psi | 18960.6kPa |
|---|---|---|
| Pump Flow Capacity | 25gal/min | 94.7L/min |
| Raise Time | 5.2sec | |
| Dump Time | 1.5sec | |
| Lower Time | 2.4sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.4ft in | 2560mm |
|---|---|---|
| Bucket Capacity - Heaped | 1yd3 | 0.77m3 |
| Bucket Width | 7.16ft in | 2180mm |
| Breakout Force | 7900lb | 35.15kN |
06 Dimensions Dimensions
| Ground Clearance | 0.95ft in | 287mm |
|---|---|---|
| Length With Bucket On Ground | 17.16ft in | 5230mm |
| Height To Top Of Cab | 8.14ft in | 2479mm |
| Wheelbase | 6.95ft in | 2116mm |
| Hinge Pin - Max Height | 11.39ft in | 3470mm |
| Reach At Max Lift And Dump | 2.88ft in | 875mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.