Specification sheet Wheel Loader Ref john-deere-204l-wheel-loader
John Deere 204L
The John Deere 204L is a wheel loader with an operating weight of 11,805.76 lb (5,355 kg), and a 61 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,805.76lb
5,355kg
Engine power
61hp
45.5kW
Net Power ◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the John Deere 204L sits in the middle of its class:
- Operating weight 11,810 lb lighter than 56% (n=374)
- Engine power 61 hp less powerful than 62% (n=367)
Not positioned on bucket capacity — withheld or unpublished for this machine.
01 Engine Specification
| Pump | Gear | |
|---|---|---|
| Engine Output-Net | 61hp | 45.5kw |
| Transmission Type | Hydrostatic | |
| Engine Make | YANMAR | |
| Engine Model | 4TNV98 | |
| Net Power | 61hp | 45.5kw |
| Torque | 176.3lb ft | 239Nm |
| Rated Speed | 2200rpm | |
| Displacement | 201.4cu in | 3.3L |
| System Voltage | 12V | |
| Emission Level | Tier 4 | |
| Alternator | 80amps |
02 Capacities Specification
| Hydraulic Tank | 23.8gal | 90L |
|---|---|---|
| Heaped Capacity | 1.1yd3 | 0.8m3 |
| Transmission | 0.3gal | 1L |
03 Operational Specification
| Operating Weight | 11805.8lb | 5355kg |
|---|---|---|
| Fuel Capacity | 13.3gal | 50L |
| Hydraulic System Fluid Capacity | 23.8gal | 90L |
| Front Axle/Diff Fluid Capacity | 1.6gal | 6L |
| Rear Axle/Diff Fluid Capacity | 1.6gal | 6L |
| Tire Size | 365/70 R18 |
04 Transmission Specification
| Pump Flow | 70gal/min | 265L/min |
|---|---|---|
| System Voltage | 12V |
05 Brakes Specification
| Parking Brake | Wet Disc | |
|---|---|---|
| Actuation | Hydraulic | |
| Brakes Type | Wet Disc & Drum |
06 Dimensions Dimensions
| Ground Clearance | 1.05ft in | 318mm |
|---|---|---|
| Length With Bucket On Ground | 17.79ft in | 5420mm |
| Width Over Tires | 5.78ft in | 1760mm |
| Wheelbase | 7.06ft in | 2150mm |
| Turning Clearance Circle | 28 ft 2 in |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.