Specification sheet Mini Excavator Ref john-deere-17g-mini-excavator

John Deere 17G

The John Deere 17G is a mini excavator with an operating weight of 3,792 lb.

✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →
Operating weight
3,792lb
 

Where it sits in its classpercentile · mini excavators

Among 479 mini excavators , the John Deere 17G sits below the median for its class:

  • Operating weight 3,790 lb lighter than 79% (n=438)

Not positioned on engine power, dig depth — withheld or unpublished for this machine.

01 Dimensions Specification

Ground Clearance 0.55ft in 168mm — metric converted from the published imperial value
Tail Swing Radius 2.24ft in 683mm — metric converted from the published imperial value
Digging Reach - Mono Boom 12.5ft in 3,810mm — metric converted from the published imperial value
Dozer Blade Height 10.24in 260.1mm — metric converted from the published imperial value
Dump Height - Mono Boom 8.24ft in 2,512mm — metric converted from the published imperial value
Overall Width 3.22ft in 981mm — metric converted from the published imperial value
Standard Dipper 3.06ft in 933mm — metric converted from the published imperial value
Track Length On Ground 4ft in 1,219mm — metric converted from the published imperial value
Transport Length Mono Boom 11.49ft in 3,502mm — metric converted from the published imperial value
Dig Depth - Mono Boom 7.19ft in 2,192mm — metric converted from the published imperial value
Undercarriage Overall Length 5.16ft in 1,573mm — metric converted from the published imperial value
Dig Height - Mono Boom 11.62ft in 3,542mm — metric converted from the published imperial value

02 Driveline Specification

Displacement 60.5cu in 991cm3 — metric converted from the published imperial value
Engine Manufacturer Yanmar
Engine Output 14.5hp 10.8kw — metric converted from the published imperial value
Emission Rating Tier 4
Rated Speed 2400rpm
Track Shoe Width 9.1in 231mm — metric converted from the published imperial value
Number Of Cylinders 3

03 Capacities Specification

Fuel Tank - Diesel 5.5gal 21l — metric converted from the published imperial value
Hydraulic Tank 3.8gal 14l — metric converted from the published imperial value
System Voltage 12V
Number Of Batteries 1

04 Performance Specification

Travel Speed 2.6mph 4.2km/h — metric converted from the published imperial value
Slew Speed 9.4rpm
Ground Bearing Pressure 3.9psi 27kpa — metric converted from the published imperial value
Breakout - Bucket 3597lb 1,632kg — metric converted from the published imperial value
Dipper Tearout 1933.4lb 876.97kg — metric converted from the published imperial value
Main Pumps - Maximum Flow 10.2gal/min 38.6l/min — metric converted from the published imperial value

05 Weights Specification

Data notes

Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.

Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.