Specification sheet Wheel Loader Ref jcb-tm420-wheel-loader

JCB TM420

The JCB TM420 is a wheel loader with an operating weight of 21,010.06 lb (9,530 kg), and a 135 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
21,010.06lb
9,530kg
Engine power
135hp
100.7kW
Net Power

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the JCB TM420 sits at the heavy end of its class:

  • Operating weight 21,010 lb heavier than 95% (n=374)
  • Engine power 135 hp more powerful than 98% (n=367)

Not positioned on bucket capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

2827B466C7011A
Side elevation
2827B2350D
Front elevation

01 Engine Specification

Capacity 1.3gal 4.8L
Number Of Cylinders 4
Engine Make JCB
Engine Model EcoMAX
Net Power 135hp 100.7kw
Gross Power 145hp 108.2kw
Power Measured @ 2200rpm
Max Torque 560 Nm
Torque Measured @ 1500rpm
Aspiration Turbocharged-charge cooled

02 Capacities Specification

Hydraulic Oil Tank 25.7gal 97L
Fuel Tank 42.3gal 160L
Def Tank 7.7gal 29L
Transmission 5.1gal 19L
Engine Oil 3.7gal 14L
Dropbox 0.4gal 1.3L

03 Operational Specification

Operating Weight 21010.1lb 9530kg

04 Electrical Specification

Alternator 150 Amp Hour
Battery Capacity 120 Amp Hour

05 Transmission Specification

Make JCB
Model PS760 - 6 Speed
Transmission Type Powershift
Max Speed - Forward 24.9mph 40km/h

06 Weights Specification

Front Axle Weight 7231.2lb 3280kg
Rear Axle Weight 13778.9lb 6250kg

07 Hydraulic System Specification

Max Operating Pressure 260 bar
Pump Flow Capacity 42.3gal/min 160L/min
Pump Type Variable displacement piston pump

08 Dimensions Dimensions

Ground Clearance 1.53ft in 466mm
Width Over Tires 7.71ft in 2350mm
Height To Top Of Cab 9.28ft in 2827mm
Wheelbase 9.05ft in 2758mm
Hinge Pin - Max Height 18.58ft in 5661mm
Height To Top Of Boom Pivot 77.76in 1975mm
Center Of Front Axle To Counterweight (Pusher) 5.65ft in 1721mm
Overall Length 23.01ft in 7011mm
Turning Radius - Inside 12.73ft in 3880mm
Wheel Track 73.23in 1860mm
Dump Reach 28.94in 735mm
Dump Height 14.48ft in 4411mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.