Specification sheet Wheel Loader Ref jcb-tm320-wheel-loader

JCB TM320

The JCB TM320 is a wheel loader with an operating weight of 17,989.72 lb (8,160 kg), and a 115 hp engine.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
17,989.72lb
8,160kg
Engine power
115hp
85.8kW
Net Power

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the JCB TM320 sits above the median for its class:

  • Operating weight 17,990 lb heavier than 79% (n=374)
  • Engine power 115 hp more powerful than 92% (n=367)

Not positioned on bucket capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

2703B472C6322A
Side elevation
2703B2350D
Front elevation

01 Engine Specification

Capacity 1.2gal 4.4L
Number Of Cylinders 4
Engine Make JCB
Engine Model EcoMAX
Net Power 115hp 85.8kw
Gross Power 125hp 93.3kw
Power Measured @ 2200rpm
Max Torque 550 Nm
Torque Measured @ 1500rpm
Aspiration Turbocharged-charge cooled
Bore 4.1in 103mm
Stroke 5.2in 132mm

02 Capacities Specification

Hydraulic Oil Tank 25.7gal 97L
Fuel Tank 42.3gal 160L
Def Tank 7.7gal 29L
Engine Oil 3.7gal 14L
Dropbox 0.4gal 1.3L

03 Operational Specification

Operating Weight 17989.8lb 8160kg

04 Electrical Specification

Voltage 12V
Alternator 150 Amp Hour
Battery Capacity 120 Amp Hour

05 Transmission Specification

Make JCB
Model PS760 - 6 Speed
Transmission Type Powershift
Max Speed - Forward 24.9mph 40km/h

06 Weights Specification

Front Axle Weight 6018.7lb 2730kg
Rear Axle Weight 12059.3lb 5470kg

07 Hydraulic System Specification

Max Operating Pressure 230 bar
Pump Flow Capacity 37gal/min 140L/min
Pump Type Variable displacement piston pump

08 Dimensions Dimensions

Ground Clearance 1.55ft in 472mm
Length With Bucket On Ground 20.75ft in 6322mm
Width Over Tires 7.71ft in 2350mm
Height To Top Of Cab 8.87ft in 2703mm
Wheelbase 8.37ft in 2550mm
Hinge Pin - Max Height 17.61ft in 5367mm
Center Of Front Axle To Counterweight (Pusher) 7.04ft in 2143mm
Height To Top Of Boom Pivot 72.25in 1835mm
Overall Length 20.75ft in 6322mm
Turning Radius - Inside 6.57ft in 2001mm
Wheel Track 73.63in 1870mm
Dump Reach 36.74in 933mm
Dump Height 14.8ft in 4511mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.