Specification sheet Wheel Loader Ref jcb-tm-300-52-wheel-loader
JCB TM 300-52
The JCB TM 300-52 is a wheel loader with an operating weight of 17,772 lb (8,061.25 kg), a 110 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,772lb
8,061.25kg
Engine power
110hp
82.1kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the JCB TM 300-52 sits above the median for its class:
- Operating weight 17,770 lb heavier than 77% (n=374)
- Engine power 110 hp more powerful than 89% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2257 | |
| Engine Model | 1104C-44TA | |
| Net Power | 110hp | 82.1kw |
| Gross Power | 121.4hp | 90.6kw |
| Power Measured @ | 2000rpm | |
| Max Torque | 320lb ft | 433.9Nm |
| Displacement | 269cu in | 4.5L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged / charge cooled |
02 Operational Specification
| Operating Weight | 17772lb | 8061.3kg |
|---|---|---|
| Fuel Capacity | 26.5gal | 100L |
| Hydraulic System Fluid Capacity | 29.1gal | 110L |
| Engine Oil Fluid Capacity | 2.9gal | 10.7L |
| Cooling System Fluid Capacity | 5.3gal | 20L |
| Transmission Fluid Capacity | 5.1gal | 19L |
| Front Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Rear Axle/Diff Fluid Capacity | 5.3gal | 20L |
| Static Tipping Weight | 9325.6lb | 4230kg |
| Turning Radius | 7.1ft in | 2150mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 100amps | |
| Tire Size | 17.5x24 |
03 Transmission Specification
| Transmission Type | 4 Speed Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.8mph | 35.1km/h |
| Max Speed - Reverse | 21.8mph | 35.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3336psi | 23000.9kPa |
|---|---|---|
| Pump Flow Capacity | 31.8gal/min | 120L/min |
| Pump Type | Twin Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 13.47ft in | 4105mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
| Bucket Width | 7.58ft in | 2310mm |
| Breakout Force | 7630.02lb | 33.94kN |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 21.76ft in | 6630mm |
| Width Over Tires | 7.49ft in | 2280mm |
| Height To Top Of Cab | 8.83ft in | 2690mm |
| Wheelbase | 8.21ft in | 2500mm |
| Hinge Pin - Max Height | 17.85ft in | 5440mm |
| Reach At Max Lift And Dump | 3.59ft in | 1092mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.