JCB 85z-1
The JCB 85z-1 is a mini excavator with an operating weight of 14,552.8 lb, and a 45.4 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the JCB 85z-1 sits at the heavy end of its class:
- Operating weight 14,550 lb heavier than 94% (n=438)
- Engine power 45 hp more powerful than 93% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Max Reach Along Ground | 22.47ft in | 6,849mm‖ — metric converted from the published imperial value |
|---|---|---|
| Minimum Front Swing Radius (No Offset) | 10ft in | 3,048mm‖ — metric converted from the published imperial value |
| Minimum Front Swing Radius (Fully Offset) | 8.73ft in | 2,661mm‖ — metric converted from the published imperial value |
| Max Digging Reach | 23.07ft in | 7,032mm‖ — metric converted from the published imperial value |
| Maximum Height To Dipper Nose Pivot Pin | 19.35ft in | 5,898mm‖ — metric converted from the published imperial value |
| Maximum Vertical Wallcut Depth | 9.65ft in | 2,941mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 16.48ft in | 5,023mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Down | 12.19ft in | 3,716mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Up | 6.89ft in | 2,100mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
03 Undercarriage Specification
| Number Of Track Rollers Per Side | 5 | |
|---|---|---|
| Track Tension | Grease | |
| Tractive Effort | 134.49lb | 61.004kg‖ — metric converted from the published imperial value |
04 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Starter Motor | 2KW | |
| Engine Model | KDI 2504 TCR | |
| Gross Power | 48hp | 36kw‖ — metric converted from the published imperial value |
| Cooling System | Water cooled | |
| Net Power | 45.4hp | 33.9kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 152559.4cu in | 2,500,006cm3‖ — metric converted from the published imperial value |
| Torque Measured @ | 1500rpm | |
| Alternator | 100amps |
05 Operational Specification
| Operating Weight | 14552.8lb | 6,601.03kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 30.4gal | 115l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 3.2gal | 12l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 31.2gal | 118l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 3gal | 11l‖ — metric converted from the published imperial value |
| Operational Voltage | 12V | |
| Hydraulic Pump Flow Capacity | 17.5gal/min | 66.2l/min‖ — metric converted from the published imperial value |
06 Performance Specification
| Travel Speed Low | 1.7mph | 2.7km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speed - High | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
| Gradeability | 30% |
07 Swing Mechanism Specification
| Swing Speed | 9.6rpm |
|---|
08 Blade Specification
| Approach Angle | 27.8degrees |
|---|
09 Hydraulic System Specification
| Nominal Output | 41.9gal/min | 159l/min‖ — metric converted from the published imperial value |
|---|
10 Blade Specification
| Maximum Height | 1.6ft in | 488mm‖ — metric converted from the published imperial value |
|---|
11 Hydraulic System Specification
| Slew Main Relief | 226lpm | |
|---|---|---|
| Excavator/Track Main Relief | 300bar |
12 Blade Specification
| Dig Depth (Below Ground) | 1.6ft in | 488mm‖ — metric converted from the published imperial value |
|---|---|---|
| Reach In Front Of Tracks | 2.1ft in | 640mm‖ — metric converted from the published imperial value |
13 Hydraulic System Specification
| Auxiliary Hydraulic Flow | 50.2gal/min | 190l/min‖ — metric converted from the published imperial value |
|---|
14 Blade Specification
| Blade Width | 2320mm | |
|---|---|---|
| Height | 18.7in | 475mm‖ — metric converted from the published imperial value |
15 Boom Specification
| Boom Swing Left | 55degrees | |
|---|---|---|
| Boom Swing Right | 60degrees | |
| Bucket Rotation | 188degrees | |
| Dipper Rotation | 114degrees | |
| Bucket Tearout | 12836.6lb | 5,822.58kg‖ — metric converted from the published imperial value |
| Dipper Tearout | 11218lb | 5,088.4kg‖ — metric converted from the published imperial value |
| Slew Speed | 10rpm |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.