JCB 8040ZTS
The JCB 8040ZTS is a mini excavator with an operating weight of 9,480 lb, a 45 hp engine, and a dig depth of 10.92 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the JCB 8040ZTS sits above the median for its class:
- Operating weight 9,480 lb heavier than 84% (n=438)
- Engine power 45 hp more powerful than 91% (n=448)
- Dig depth 10.9 ft deeper-digging than 77% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 16.75ft in | 5,105mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 17.18ft in | 5,236mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.42ft in | 2,566mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.58ft in | 3,834mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18.43ft in | 5,617mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.25ft in | 2,210mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.92ft in | 3,328mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Arm Length 5ft.0in.(1525mm ) |
02 Dimensions Specification
| Width To Outside Of Tracks | 6.5ft in | 1,981mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 6.08ft in | 1,853mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.12ft in | 341mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.42ft in | 2,566mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.25ft in | 991mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 2.25ft in | 686mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 16in | 406mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 5.17ft in | 1,576mm‖ — metric converted from the published imperial value |
| Drawbar Pull | 10858.3lb | 4,925.24kg‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.42mph | 3.89km/h‖ — metric converted from the published imperial value |
| Number Of Track Rollers Per Side | 4 | |
| Ground Pressure | 4.12psi | 28.4kpa‖ — metric converted from the published imperial value |
04 Engine Specification
| Engine Make | 2351 | |
|---|---|---|
| Engine Model | 404-22c | |
| Gross Power | 46.4hp | 34.6kw‖ — metric converted from the published imperial value |
| Net Power | 45hp | 34kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 2.3cu in | 38cm3‖ — metric converted from the published imperial value |
| Max Torque | 101.3lb ft | |
| Torque Measured @ | 1600rpm |
05 Operational Specification
| Operating Weight | 9480lb | 4,300kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 18gal | 68l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 3.6gal | 14l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 25.9gal | 98l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 3.8gal | 14l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps | |
| Hydraulic System Relief Valve Pressure | 3191psi | 22,001kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 23.8gal/min | 90.1l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 10rpm |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.