JCB 8020 CTS
The JCB 8020 CTS is a mini excavator with an operating weight of 4,557 lb, and a 19 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the JCB 8020 CTS sits below the median for its class:
- Operating weight 4,560 lb lighter than 70% (n=438)
- Engine power 19 hp less powerful than 70% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Maximum Height To Dipper Nose Pivot Pin | 10.48ft in | 3,194mm‖ — metric converted from the published imperial value |
|---|---|---|
| Minimum Front Swing Radius (No Offset) | 5.7ft in | 1,737mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Up | 8.22ft in | 2,505mm‖ — metric converted from the published imperial value |
| Maximum Vertical Wallcut Depth | 7.18ft in | 2,188mm‖ — metric converted from the published imperial value |
| Max Digging Height | 12.11ft in | 3,691mm‖ — metric converted from the published imperial value |
| Max Digging Reach | 14.14ft in | 4,310mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 9.12ft in | 2,780mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Down | 8.6ft in | 2,621mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Ground Clearance | 0.49ft in | 149mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 3.65ft in | 1,113mm‖ — metric converted from the published imperial value |
| Width Over Tracks | 3.29ft in | 1,003mm‖ — metric converted from the published imperial value |
| Cab Width | 38.35in | 974.1mm‖ — metric converted from the published imperial value |
| Height Over Cab | 7.73ft in | 2,356mm‖ — metric converted from the published imperial value |
| Overall Width Of Superstructure | 3.27ft in | 997mm‖ — metric converted from the published imperial value |
| Undercarriage Overall Length | 5.66ft in | 1,725mm‖ — metric converted from the published imperial value |
| Cab Length | 309.35gal | 1,171l‖ — metric converted from the published imperial value |
| Transport Length | 141.74in | 3,600.2mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Number Of Bottom Rollers Per Side | 4 | |
|---|---|---|
| Track Tension | Grease |
04 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Starter Motor | 1.48hp | 1.1kw‖ — metric converted from the published imperial value |
| Engine Model | 403D-11 | |
| Gross Power | 19.7hp | 14.7kw‖ — metric converted from the published imperial value |
| Cooling System | Water cooled | |
| Net Power | 19hp | 14kw‖ — metric converted from the published imperial value |
| Displacement | 69.1cu in | 1,132cm3‖ — metric converted from the published imperial value |
| Gross Torque | 49.3lb ft | |
| Max Torque | 47.4lb ft | |
| Alternator | 40amps |
05 Capacities Specification
| Fuel Tank | 6.3gal | 24l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank | 6.7gal | 25l‖ — metric converted from the published imperial value |
| Hydraulic System | 7.4gal | 28l‖ — metric converted from the published imperial value |
| Engine Oil | 1.1gal | 4.2l‖ — metric converted from the published imperial value |
| Engine Coolant | 1.4gal | 5.3l‖ — metric converted from the published imperial value |
06 Operational Specification
| Operating Weight | 4557lb | 2,067kg‖ — metric converted from the published imperial value |
|---|
07 Performance Specification
| Gradeability | 35% |
|---|
08 Blade Specification
| Approach Angle | 25degrees |
|---|
09 Hydraulic System Specification
| Nominal Output | 14.7gal/min | 55.6l/min‖ — metric converted from the published imperial value |
|---|
10 Blade Specification
| Maximum Height | 1.1ft in | 335mm‖ — metric converted from the published imperial value |
|---|
11 Hydraulic System Specification
| Slew Main Relief | 160bar | |
|---|---|---|
| Excavator/Track Main Relief | 230bar |
12 Blade Specification
| Dig Depth (Below Ground) | 0.7ft in | 213mm‖ — metric converted from the published imperial value |
|---|---|---|
| Reach In Front Of Tracks | 1.3ft in | 396mm‖ — metric converted from the published imperial value |
13 Hydraulic System Specification
| Hydraulic Motor (Travel) | Piston | |
|---|---|---|
| Auxiliary Hydraulic Flow | 6.9gal/min | 26l/min‖ — metric converted from the published imperial value |
| Pump Type | 1 Variable (2 Ports) or 1 Gear |
14 Blade Specification
| Blade Height | 6.9in | 175mm‖ — metric converted from the published imperial value |
|---|---|---|
| Width | 3.3ft in | 1,006mm‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.