JCB 8018CTS
The JCB 8018CTS is a mini excavator with an operating weight of 4,017 lb, and a 19 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the JCB 8018CTS sits below the median for its class:
- Operating weight 4,020 lb lighter than 74% (n=438)
- Engine power 19 hp less powerful than 70% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Dimensions Specification
| Width To Outside Of Tracks | 3.22ft in | 981mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 0.52ft in | 158mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.61ft in | 2,320mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.48ft in | 1,061mm‖ — metric converted from the published imperial value |
02 Engine Specification
| Engine Make | 2257 | |
|---|---|---|
| Engine Model | 403D-11 | |
| Gross Power | 19.7hp | 14.7kw‖ — metric converted from the published imperial value |
| Net Power | 19hp | 14kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2200rpm | |
| Displacement | 69.1cu in | 1,132cm3‖ — metric converted from the published imperial value |
| Max Torque | 47.4lb ft | |
| Torque Measured @ | 1900rpm |
03 Operational Specification
| Operating Weight | 4017lb | 1,822kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 6.2gal | 23l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1.4gal | 5.3l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 7.4gal | 28l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.1gal | 4.2l‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.