JCB 65R-1
The JCB 65R-1 is a mini excavator with an operating weight of 14,903.3 lb, and a 44.4 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the JCB 65R-1 sits at the heavy end of its class:
- Operating weight 14,900 lb heavier than 95% (n=438)
- Engine power 44 hp more powerful than 90% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Max Reach Along Ground | 21.71ft in | 6,617mm‖ — metric converted from the published imperial value |
|---|---|---|
| Minimum Front Swing Radius (No Offset) | 9.24ft in | 2,816mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Up | 12.98ft in | 3,956mm‖ — metric converted from the published imperial value |
| Maximum Height To Dipper Nose Pivot Pin | 16.69ft in | 5,087mm‖ — metric converted from the published imperial value |
| Maximum Vertical Wallcut Depth | 9.25ft in | 2,819mm‖ — metric converted from the published imperial value |
| Minimum Front Swing Radius (Fully Offset) | 7.94ft in | 2,420mm‖ — metric converted from the published imperial value |
| Max Digging Reach | 22.07ft in | 6,727mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 19.78ft in | 6,029mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Down | 13.16ft in | 4,011mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Ground Clearance | 0.79ft in | 241mm‖ — metric converted from the published imperial value |
|---|---|---|
| Height To Top Of Cab | 8.48ft in | 2,585mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.89ft in | 1,186mm‖ — metric converted from the published imperial value |
| Track Gauge | 5.25ft in | 1,600mm‖ — metric converted from the published imperial value |
| Width Over Tracks | 6.57ft in | 2,003mm‖ — metric converted from the published imperial value |
| Overall Width Of Superstructure | 5.9ft in | 1,798mm‖ — metric converted from the published imperial value |
| Transport Height- Minimum | 1837.28ft in | 560,003mm‖ — metric converted from the published imperial value |
| Transport Length, Minimum | 18733.6ft in | 5,710,001mm‖ — metric converted from the published imperial value |
| Cab Height | 61.19in | 1,554mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Tractive Effort | 120.16lb | 54.504kg‖ — metric converted from the published imperial value |
|---|---|---|
| Number Of Track Rollers Per Side | 4 | |
| Max Travel Speed | 2.68mph | 4.31km/h‖ — metric converted from the published imperial value |
| Track Tension | Grease |
04 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Starter Motor | 2KW | |
| Engine Model | 404D-22 | |
| Gross Power | 47.9hp | 35.7kw‖ — metric converted from the published imperial value |
| Cooling System | Water cooled | |
| Net Power | 44.4hp | 33.1kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2600rpm | |
| Displacement | 132970.8cu in | 2,179,006cm3‖ — metric converted from the published imperial value |
| Torque Measured @ | 1800rpm | |
| Alternator | 85amps |
05 Operational Specification
| Operating Weight | 14903.3lb | 6,760.02kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 22gal | 83l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 24.5gal | 92.7l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 2.5gal | 9.5l‖ — metric converted from the published imperial value |
| Operational Voltage | 12V | |
| Hydraulic Pump Flow Capacity | 15.2gal/min | 57.5l/min‖ — metric converted from the published imperial value |
06 Performance Specification
| Travel Speed Low | 1.7mph | 2.7km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speed - High | 3mph | 5km/h‖ — metric converted from the published imperial value |
| Gradeability | 35% |
07 Swing Mechanism Specification
| Swing Speed | 9.6rpm |
|---|
08 Blade Specification
| Approach Angle | 26degrees |
|---|
09 Hydraulic System Specification
| Excavator/Track Main Relief | 250bar | |
|---|---|---|
| Slew Main Relief | 216bar | |
| Nominal Output | 38.4gal/min | 145l/min‖ — metric converted from the published imperial value |
10 Blade Specification
| Maximum Height | 1.6ft in | 488mm‖ — metric converted from the published imperial value |
|---|---|---|
| Dig Depth (Below Ground) | 1.9ft in | 579mm‖ — metric converted from the published imperial value |
| Reach In Front Of Tracks | 2.6ft in | 792mm‖ — metric converted from the published imperial value |
11 Hydraulic System Specification
| Hydraulic Motor (Travel) | Piston | |
|---|---|---|
| Auxiliary Hydraulic Flow | 50.2gal/min | 190l/min‖ — metric converted from the published imperial value |
12 Blade Specification
| Blade Width | 2018mm |
|---|
13 Hydraulic System Specification
| Pump Type | 63cc |
|---|
14 Blade Specification
| Height | 16.5in | 419mm‖ — metric converted from the published imperial value |
|---|
15 Boom Specification
| Boom Swing Left | 60degrees | |
|---|---|---|
| Boom Swing Right | 60degrees | |
| Dipper Rotation | 118degrees | |
| Bucket Tearout | 10701lb | 4,853.9kg‖ — metric converted from the published imperial value |
| Dipper Tearout | 6879.2lb | 3,120.4kg‖ — metric converted from the published imperial value |
| Slew Speed | 9.2rpm |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.