JCB 57C-1
The JCB 57C-1 is a mini excavator with an operating weight of 11,830.1 lb, and a 14.5 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the JCB 57C-1 sits at the heavy end of its class:
- Operating weight 11,830 lb heavier than 92% (n=438)
- Engine power 15 hp less powerful than 92% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Maximum Height To Dipper Nose Pivot Pin | 16.91ft in | 5,154mm‖ — metric converted from the published imperial value |
|---|---|---|
| Minimum Front Swing Radius (No Offset) | 8.67ft in | 2,643mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Down | 13.38ft in | 4,078mm‖ — metric converted from the published imperial value |
| Maximum Digging Depth – Dozer Up | 12.66ft in | 3,859mm‖ — metric converted from the published imperial value |
| Maximum Vertical Wallcut Depth | 6.74ft in | 2,054mm‖ — metric converted from the published imperial value |
| Max Digging Height | 18.6ft in | 5,669mm‖ — metric converted from the published imperial value |
| Max Digging Reach | 20.08ft in | 6,120mm‖ — metric converted from the published imperial value |
| Max Digging Reach On Ground | 19.67ft in | 5,995mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 14.03ft in | 4,276mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Ground Clearance | 0.99ft in | 302mm‖ — metric converted from the published imperial value |
|---|---|---|
| Tail Swing Radius | 3.29ft in | 1,003mm‖ — metric converted from the published imperial value |
| Track Gauge | 5.09ft in | 1,551mm‖ — metric converted from the published imperial value |
| Width Over Tracks | 3.22ft in | 981mm‖ — metric converted from the published imperial value |
| Cab Length | 341.05gal | 1,291l‖ — metric converted from the published imperial value |
| Cab Width | 40.16in | 1,020mm‖ — metric converted from the published imperial value |
| Height Over Cab | 8.37ft in | 2,551mm‖ — metric converted from the published imperial value |
| Overall Width Of Superstructure | 6.06ft in | 1,847mm‖ — metric converted from the published imperial value |
| Transport Length | 217.25in | 5,518.1mm‖ — metric converted from the published imperial value |
| Undercarriage Overall Length | 8.17ft in | 2,490mm‖ — metric converted from the published imperial value |
| Cab Height | 2551mm |
03 Undercarriage Specification
| Number Of Bottom Rollers Per Side | 4 | |
|---|---|---|
| Track Tension | Grease | |
| Tractive Effort | 80.47lb | 36.5kg‖ — metric converted from the published imperial value |
04 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Engine Model | Stage 3A 404D-22 | |
| Gross Power | 35.7hp | 26.6kw‖ — metric converted from the published imperial value |
| Cooling System | Water cooled | |
| Net Power | 14.5hp | 10.8kw‖ — metric converted from the published imperial value |
| Displacement | 132970.8cu in | 2,179,006cm3‖ — metric converted from the published imperial value |
| Gross Torque | 105.5lb ft | |
| Alternator | 85amps |
05 Capacities Specification
| Fuel Tank | 20.1gal | 76.1l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank | 14.6gal | 55.3l‖ — metric converted from the published imperial value |
| Hydraulic System | 26.5gal | 100l‖ — metric converted from the published imperial value |
| Engine Oil | 2.5gal | 9.5l‖ — metric converted from the published imperial value |
| Engine Coolant | 3.2gal | 12l‖ — metric converted from the published imperial value |
06 Operational Specification
| Operating Weight | 11830.1lb | 5,366.04kg‖ — metric converted from the published imperial value |
|---|---|---|
| Operational Voltage | 12V |
07 Performance Specification
| Travel Speed Low | 1.9mph | 3.1km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Travel Speed - High | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
08 Weights Specification
| Shipping | 11543.5lb | 5,236.04kg‖ — metric converted from the published imperial value |
|---|
09 Blade Specification
| Approach Angle | 31degrees |
|---|
10 Hydraulic System Specification
| Nominal Output | 33.3gal/min | 126l/min‖ — metric converted from the published imperial value |
|---|
11 Blade Specification
| Maximum Height | 1.5ft in | 457mm‖ — metric converted from the published imperial value |
|---|
12 Hydraulic System Specification
| Slew Main Relief | 216bar | |
|---|---|---|
| Excavator/Track Main Relief | 265bar |
13 Blade Specification
| Dig Depth (Below Ground) | 1.6ft in | 488mm‖ — metric converted from the published imperial value |
|---|
14 Hydraulic System Specification
| Auxiliary Hydraulic Flow | 23.8gal/min | 90.1l/min‖ — metric converted from the published imperial value |
|---|
15 Blade Specification
| Blade Height | 15.8in | 401mm‖ — metric converted from the published imperial value |
|---|---|---|
| Width | 6.5ft in | 1,981mm‖ — metric converted from the published imperial value |
16 Boom Specification
| Boom Swing Left | 75degrees | |
|---|---|---|
| Boom Swing Right | 55degrees | |
| Bucket Rotation | 201degrees | |
| Dipper Rotation | 126degrees | |
| Bucket Tearout | 3507.1lb | 1,590.8kg‖ — metric converted from the published imperial value |
| Dipper Tearout | 1978.4lb | 897.39kg‖ — metric converted from the published imperial value |
| Slew Speed | 7.9rpm |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.