Specification sheet Wheel Loader Ref jcb-456ht-high-lift-wheel-loader
JCB 456HT High Lift
The JCB 456HT High Lift is a wheel loader with an operating weight of 47,036 lb (21,335.18 kg), a 215 hp engine, and a 4.84 yd³ (3.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
47,036lb
21,335.18kg
Engine power
215hp
160.4kW
Net Power Bucket capacity
4.84yd³
3.7m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the JCB 456HT High Lift sits at the compact end of its class:
- Operating weight 47,040 lb lighter than 88% (n=198)
- Engine power 215 hp less powerful than 93% (n=190)
- Bucket capacity 4.8 yd³ smaller-bucket than 84% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | QSC 8.3 | |
|---|---|---|
| Net Power | 215hp | 160.4kw |
| Gross Power | 207hp | 154.4kw |
| Max Torque | 675lb ft | 915.2Nm |
| Displacement | 8.3cu in | 0.2L |
| Aspiration | Turbo charged |
02 Operational Specification
| Operating Weight | 47036lb | 21335.2kg |
|---|---|---|
| Fuel Capacity | 84gal | 318L |
| Hydraulic System Fluid Capacity | 57gal | 215.8L |
| Engine Oil Fluid Capacity | 5gal | 19L |
| Cooling System Fluid Capacity | 10.5gal | 39.8L |
| Transmission Fluid Capacity | 9gal | 34.1L |
| Front Axle/Diff Fluid Capacity | 18gal | 68.2L |
| Rear Axle/Diff Fluid Capacity | 13gal | 49.3L |
| Static Tipping Weight | 21363lb | 9690.1kg |
| Turning Radius | 10.5ft in | 3182mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 23.5R25 XHA (L3) |
03 Transmission Specification
| Transmission Type | Smooth shift powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.4mph | 37.7km/h |
| Max Speed - Reverse | 15.3mph | 24.7km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3625psi | 24993.5kPa |
|---|---|---|
| Pump Flow Capacity | 43gal/min | 162.8L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 4.1sec | |
| Pump Type | Twin variable displacement piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 13.06ft in | 3979mm |
|---|---|---|
| Bucket Capacity - Struck | 3.79yd3 | 2.9m3 |
| Bucket Width | 9.31ft in | 2837mm |
| Bucket Capacity - Heaped | 4.84yd3 | 3.7m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.55ft in | 470mm |
|---|---|---|
| Length With Bucket On Ground | 31.01ft in | 9450mm |
| Width Over Tires | 8.87ft in | 2702mm |
| Height To Top Of Cab | 11.06ft in | 3370mm |
| Wheelbase | 6.89ft in | 2100mm |
| Hinge Pin - Max Height | 16.39ft in | 4994mm |
| Reach At Max Lift And Dump | 4.38ft in | 1333mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.