Specification sheet Wheel Loader Ref jcb-436ht-super-high-lift-wheel-loader
JCB 436HT Super High Lift
The JCB 436HT Super High Lift is a wheel loader with an operating weight of 35,972.83 lb (16,317 kg), a 173 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
35,972.83lb
16,317kg
Engine power
173hp
129.1kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the JCB 436HT Super High Lift sits above the median for its class:
- Operating weight 35,970 lb heavier than 70% (n=439)
- Engine power 173 hp more powerful than 60% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2257 | |
| Engine Model | BTAA 5.9C | |
| Net Power | 173hp | 129.1kw |
| Gross Power | 177hp | 132kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 579.8lb ft | 786Nm |
| Displacement | 360.1cu in | 5.9L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 35972.9lb | 16317kg |
|---|---|---|
| Fuel Capacity | 60.8gal | 230L |
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 9.3gal | 35L |
| Transmission Fluid Capacity | 9gal | 34L |
| Front Axle/Diff Fluid Capacity | 10.4gal | 39L |
| Rear Axle/Diff Fluid Capacity | 10.4gal | 39L |
| Static Tipping Weight | 14266.2lb | 6471kg |
| Turning Radius | 20.4ft in | 6196mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Tire Size | 20.5R25 HXA (L3) |
03 Transmission Specification
| Transmission Type | smooth shift powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 16.5mph | 26.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3625psi | 24993.5kPa |
|---|---|---|
| Pump Flow Capacity | 34.9gal/min | 132L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1sec | |
| Lower Time | 3.4sec | |
| Pump Type | twin variable displacement piston pumps |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 13.27ft in | 4042mm |
|---|---|---|
| Breakout Force | 34395.77lb | 153kN |
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
| Bucket Capacity - Struck | 2.6yd3 | 1.99m3 |
| Bucket Width | 8.99ft in | 2740mm |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 459mm |
|---|---|---|
| Length With Bucket On Ground | 25.33ft in | 7720mm |
| Height To Top Of Cab | 10.88ft in | 3315mm |
| Wheelbase | 9.85ft in | 3000mm |
| Hinge Pin - Max Height | 16.33ft in | 4976mm |
| Reach At Max Lift And Dump | 3.87ft in | 1178mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.