Specification sheet Wheel Loader Ref jcb-436-wastemaster-wheel-loader
JCB 436 Wastemaster
The JCB 436 Wastemaster is a wheel loader with an operating weight of 34,491.32 lb (15,645 kg), a 173 hp engine, and a 3.14 yd³ (2.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
34,491.32lb
15,645kg
Engine power
173hp
129.1kW
Net Power Bucket capacity
3.14yd³
2.4m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the JCB 436 Wastemaster sits above the median for its class:
- Operating weight 34,490 lb heavier than 65% (n=439)
- Engine power 173 hp more powerful than 60% (n=408)
- Bucket capacity 3.1 yd³ smaller-bucket than 53% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2257 | |
| Engine Model | BTAA 5.9C | |
| Net Power | 173hp | 129.1kw |
| Gross Power | 177hp | 132kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 579.8lb ft | 786Nm |
| Displacement | 360.1cu in | 5.9L |
| Torque Measured @ | 1300rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 34491.4lb | 15645kg |
|---|---|---|
| Fuel Capacity | 60.8gal | 230L |
| Hydraulic System Fluid Capacity | 55.5gal | 210L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 9.3gal | 35L |
| Transmission Fluid Capacity | 9gal | 34L |
| Front Axle/Diff Fluid Capacity | 10.4gal | 39L |
| Rear Axle/Diff Fluid Capacity | 10.4gal | 39L |
| Static Tipping Weight | 14839.4lb | 6731kg |
| Turning Radius | 19.4ft in | 5900mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 20.5R25 HXA (L3) |
03 Transmission Specification
| Transmission Type | smooth shift powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 16.5mph | 26.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3625psi | 24993.5kPa |
|---|---|---|
| Pump Flow Capacity | 34.9gal/min | 132L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1sec | |
| Lower Time | 3.4sec | |
| Pump Type | twin variable displacement piston pumps |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 13.85ft in | 4220mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.14yd3 | 2.4m3 |
| Bucket Capacity - Struck | 2.7yd3 | 2.06m3 |
| Bucket Width | 8.86ft in | 2700mm |
| Breakout Force | 34395.77lb | 153kN |
06 Dimensions Dimensions
| Ground Clearance | 1.61ft in | 488mm |
|---|---|---|
| Length With Bucket On Ground | 25.33ft in | 7720mm |
| Width Over Tires | 8.52ft in | 2594mm |
| Height To Top Of Cab | 10.98ft in | 3344mm |
| Wheelbase | 9.85ft in | 3000mm |
| Hinge Pin - Max Height | 17.2ft in | 5242mm |
| Reach At Max Lift And Dump | 3.51ft in | 1068mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.