Specification sheet Wheel Loader Ref jcb-416bht-wheel-loader
JCB 416BHT
The JCB 416BHT is a wheel loader with an operating weight of 19,356.59 lb (8,780 kg), a 108 hp engine, and a 1.84 yd³ (1.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,356.59lb
8,780kg
Engine power
108hp
80.6kW
Net Power Bucket capacity
1.84yd³
1.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the JCB 416BHT sits at the heavy end of its class:
- Operating weight 19,360 lb heavier than 87% (n=374)
- Engine power 108 hp more powerful than 87% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 74% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 1004-40TW | |
| Net Power | 108hp | 80.6kw |
| Gross Power | 114hp | 85.1kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 323.8lb ft | 439Nm |
| Displacement | 243.5cu in | 4L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 19356.6lb | 8780kg |
|---|---|---|
| Fuel Capacity | 37gal | 140L |
| Hydraulic System Fluid Capacity | 33.1gal | 125L |
| Engine Oil Fluid Capacity | 2.7gal | 10L |
| Cooling System Fluid Capacity | 5.7gal | 21.5L |
| Transmission Fluid Capacity | 5.1gal | 19L |
| Front Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Rear Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Static Tipping Weight | 13995lb | 6348kg |
| Turning Radius | 17.5ft in | 5325mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 72amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 17.5x25x12SGL |
03 Transmission Specification
| Transmission Type | 4 wheel drive, semi automatic full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3190psi | 21994.3kPa |
|---|---|---|
| Pump Flow Capacity | 41.3gal/min | 156L/min |
| Raise Time | 4.6sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3sec | |
| Pump Type | piston pump, variable displacement, load sensing system |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.96ft in | 2728mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.84yd3 | 1.4m3 |
| Bucket Capacity - Struck | 1.55yd3 | 1.18m3 |
| Bucket Width | 7.88ft in | 2400mm |
| Breakout Force | 22570.82lb | 100.4kN |
06 Dimensions Dimensions
| Ground Clearance | 1.47ft in | 448mm |
|---|---|---|
| Length With Bucket On Ground | 19.9ft in | 6064mm |
| Width Over Tires | 7.65ft in | 2330mm |
| Height To Top Of Cab | 9.97ft in | 3037mm |
| Wheelbase | 9.19ft in | 2800mm |
| Hinge Pin - Max Height | 11.92ft in | 3633mm |
| Reach At Max Lift And Dump | 3.09ft in | 940mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.