Specification sheet Wheel Loader Ref jcb-414s-wheel-loader
JCB 414S
The JCB 414S is a wheel loader with an operating weight of 22,564.32 lb (10,235 kg), a 142.2 hp engine, and a 1.84 yd³ (1.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,564.32lb
10,235kg
Engine power
142.2hp
106kW
Net Power Bucket capacity
1.84yd³
1.4m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the JCB 414S sits at the compact end of its class:
- Operating weight 22,560 lb lighter than 97% (n=439)
- Engine power 142 hp less powerful than 72% (n=408)
- Bucket capacity 1.8 yd³ smaller-bucket than 99% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 0 | |
| Engine Model | BTAA5.9C | |
| Net Power | 142.2hp | 106kw |
| Gross Power | 150.2hp | 112kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 455.1lb ft | 617Nm |
| Displacement | 360.1cu in | 5.9L |
| Torque Measured @ | 1600rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 22564.4lb | 10235kg |
|---|---|---|
| Fuel Capacity | 37gal | 140L |
| Hydraulic System Fluid Capacity | 34.4gal | 130L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Cooling System Fluid Capacity | 5.7gal | 21.5L |
| Transmission Fluid Capacity | 7.3gal | 27.5L |
| Front Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Rear Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Static Tipping Weight | 11444.2lb | 5191kg |
| Turning Radius | 18.5ft in | 5610mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 25degrees | |
| Tire Size | 17.5LR24 XM27 |
03 Transmission Specification
| Transmission Type | smooth shift powershift | |
|---|---|---|
| Number Of Forward Gears | 6 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed - Reverse | 16.7mph | 26.8km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3480psi | 23993.8kPa |
|---|---|---|
| Pump Flow Capacity | 23.8gal/min | 90L/min |
| Raise Time | 4.6sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3sec | |
| Pump Type | twin gear pumps |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 12.44ft in | 3789mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.84yd3 | 1.4m3 |
| Bucket Capacity - Struck | 1.55yd3 | 1.18m3 |
| Bucket Width | 7.88ft in | 2400mm |
| Breakout Force | 12094.73lb | 53.8kN |
06 Dimensions Dimensions
| Ground Clearance | 1.17ft in | 355mm |
|---|---|---|
| Length With Bucket On Ground | 21.3ft in | 6490mm |
| Width Over Tires | 8.04ft in | 2450mm |
| Height To Top Of Cab | 9.75ft in | 2971mm |
| Wheelbase | 9.19ft in | 2800mm |
| Hinge Pin - Max Height | 12.08ft in | 3681mm |
| Reach At Max Lift And Dump | 3.14ft in | 957mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.