Specification sheet Wheel Loader Ref jcb-411ht-wheel-loader
JCB 411HT
The JCB 411HT is a wheel loader with an operating weight of 19,365.41 lb (8,784 kg), a 85.3 hp engine, and a 1.57 yd³ (1.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,365.41lb
8,784kg
Engine power
85.3hp
63.7kW
Net Power Bucket capacity
1.57yd³
1.2m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the JCB 411HT sits at the heavy end of its class:
- Operating weight 19,370 lb heavier than 87% (n=374)
- Engine power 85 hp more powerful than 69% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2257 | |
| Engine Model | JCB EcoMAX T4F | |
| Engine Type | 4 stroke direct injection | |
| Net Power | 85.3hp | 63.7kw |
| Gross Power | 109hp | 81.3kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 516 Nm | |
| Displacement | 268.6cu in | 4.4L |
| Torque Measured @ | 1450rpm | |
| Aspiration | Turbo charged | |
| Bore | 4.1in | 103mm |
| Stroke | 5.2in | 132mm |
02 Operational Specification
| Def Tank Capacity | 5.3gal | 20L |
|---|---|---|
| Auxiliary Fuel Tank | 29.4gal | 111L |
| Operating Weight | 19365.5lb | 8784kg |
| Fuel Capacity | 30.7gal | 116L |
| Hydraulic System Fluid Capacity | 41gal | 155L |
| Engine Oil Fluid Capacity | 3.1gal | 11.5L |
| Cooling System Fluid Capacity | 6.1gal | 23L |
| Transmission Fluid Capacity | 7.2gal | 27L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 11834.5lb | 5368kg |
| Turning Radius | 17.8ft in | 5414mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 100amps | |
| Rear Axle Oscillation | 11degrees | |
| Tire Size | Michelin 15.5R25 XHA (L3) | |
| Articulation Angle | 40degrees |
03 Transmission Specification
| Transmission Type | Smooth shift Powershift ZF 4WG115 | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 31.1mph | 50km/h |
| Max Speed - Reverse | 23.7mph | 38.1km/h |
04 Hydraulic System Specification
| Max Operating Pressure | 220 bar | |
|---|---|---|
| Relief Valve Setting | 3190psi | 21994.3kPa |
| Pump Flow Capacity | 13.4gal/min | 50.6L/min |
| Raise Time | 5sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.7sec | |
| Total Cycle | 9.8sec | |
| Pump Type | Double gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.13ft in | 2780mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.57yd3 | 1.2m3 |
| Bucket Capacity - Struck | 1.33yd3 | 1.01m3 |
| Bucket Width | 7.39ft in | 2250mm |
| Breakout Force | 16456.02lb | 73.2kN |
06 Dimensions Dimensions
| Ground Clearance | 1.13ft in | 344mm |
|---|---|---|
| Length With Bucket On Ground | 20.44ft in | 6229mm |
| Width Over Tires | 7.24ft in | 2204mm |
| Height To Top Of Cab | 10.03ft in | 3057mm |
| Wheelbase | 9.03ft in | 2750mm |
| Hinge Pin - Max Height | 11.71ft in | 3569mm |
| Reach At Max Lift And Dump | 3.04ft in | 926mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.