Specification sheet Wheel Loader Ref jcb-411ht-high-lift-wheel-loader
JCB 411HT High Lift
The JCB 411HT High Lift is a wheel loader with an operating weight of 19,122.9 lb (8,674 kg), a 85.3 hp engine, and a 1.57 yd³ (1.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
19,122.9lb
8,674kg
Engine power
85.3hp
63.7kW
Net Power Bucket capacity
1.57yd³
1.2m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the JCB 411HT High Lift sits at the heavy end of its class:
- Operating weight 19,120 lb heavier than 86% (n=374)
- Engine power 85 hp more powerful than 69% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2257 | |
| Net Power | 85.3hp | 63.7kw |
| Gross Power | 92hp | 68.7kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 286.2lb ft | 388Nm |
| Displacement | 268.6cu in | 4.4L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 19122.9lb | 8674kg |
|---|---|---|
| Fuel Capacity | 33.1gal | 125L |
| Hydraulic System Fluid Capacity | 29.1gal | 110L |
| Engine Oil Fluid Capacity | 3.1gal | 11.5L |
| Cooling System Fluid Capacity | 6.1gal | 23L |
| Transmission Fluid Capacity | 7.2gal | 27L |
| Front Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Rear Axle/Diff Fluid Capacity | 6.7gal | 25L |
| Static Tipping Weight | 11834.5lb | 5368kg |
| Turning Radius | 17.8ft in | 5414mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 12.5degrees | |
| Tire Size | Michelin 15.5R25 XHA (L3) |
03 Transmission Specification
| Transmission Type | smooth shift powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.4mph | 37.5km/h |
| Max Speed - Reverse | 17.1mph | 27.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3190psi | 21994.3kPa |
|---|---|---|
| Pump Flow Capacity | 13.3gal/min | 50L/min |
| Raise Time | 5sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.7sec | |
| Pump Type | double gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.73ft in | 2658mm |
|---|---|---|
| Breakout Force | 16456.02lb | 73.2kN |
| Bucket Capacity - Heaped | 1.57yd3 | 1.2m3 |
| Bucket Capacity - Struck | 1.31yd3 | 1m3 |
| Bucket Width | 7.39ft in | 2250mm |
06 Dimensions Dimensions
| Ground Clearance | 1.35ft in | 410mm |
|---|---|---|
| Length With Bucket On Ground | 19.9ft in | 6064mm |
| Height To Top Of Cab | 10.1ft in | 3078mm |
| Wheelbase | 8.86ft in | 2700mm |
| Hinge Pin - Max Height | 11.06ft in | 3371mm |
| Reach At Max Lift And Dump | 3.51ft in | 1069mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.